- Reaction score
- 247
Hi all this is not my usual thing but, I had a look at a a jewelery display for a shop it has three 12V bulbs and a 230V rotary motor for the display, it is now on its 3rd lighting transformer and now it will only light 2 bulbs if three are fitted they go on and off about every 10 seconds, the transformer has three outputs, also there is a capacitor coupling the motor and tranny circuits is it possible this is at fault, what are the specs I should look for (output etc) when ordering a new transformer as I just copied what was fitted, I have a feeling that the bulbs fitted are of the wrong wattage as they have been replaced by the shop owner
P
P