Discuss faffing with 2 way lighting in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Reaction score
17
Good day,

At a house and theres a lady who has a hallway light, and a landing light.
She has:
downstairs - a 3 gang switch - hallway light, outdoor light, and landing light.
upstairs - 1 gang switch - landing light.

She wants to be able to switch the hall light from upstairs. This house is just finished being fully decorated.
Without running a three core between these switches is there a way to make that happen, as in to not have a load of making good left afterwards?
Is it feasible/do able to alter the wiring, so that the upstairs switch would become 2 gang, and switch landing and hallway by meaning the downstairs can no longer switch the landing light.

Been a while,

Thanks
 
Won't she still want to switch the landing light from downstairs? You may be able to pull a new cable through the existing route if you can get access.
 
Won't she still want to switch the landing light from downstairs? You may be able to pull a new cable through the existing route if you can get access.
not without some extensive making good,damage to the floor, walls etc Mrs housewife have decided what she wanted before all the decorating was done, not sure She would be to pleased with all the repairs to Her nice house. Still a nice thought, I personally think access to the original cable route would very hard to get.
 
The least amount of cores needed for 2x2 ways on the landing.it must have 2 pairs of strappers, the chances are you will have at most a 3-core between landing and Hall

The switched feed to the Hall light could be connected to the one leg of the landing 3 core to have the both lights on together,however, be careful that both lights are fed by the same mcb
There are also wireless switches available that could do the job
 
I guess it all depends on construction methods, but any chance of an alternative route for a new cable which doesn't result in lots of making good?
 
She said she would rather be able to control both from upstairs instead of how it is, if its too much hassle any other method. No easy route for new cable, new carpets, fresh walls.
 
i'd go with remote switching . then she can carry a fob round her neck, instead of the rope you would like to strangle her with.
 
I think wireless is the only way now as I bet the landing light is on a different circuit therefore you will have the problem of borrowed neutral.
 
If you can get from the outside light,to the hall 3-gang any easier,you could come from the eaves to the outside light,in conduit,and hard-wire the shared neutral and strapper problem,right out...

Alternatively,it's RC fun,or a return for the decorator...;)
 
Easiest option would be to double the landing light up with the hallway light creating a 2g downstairs (outsidde light & landing/hallway light) upstairs 1g switching landing& hallway. Only problem you may encounter is the two being on seperate feeds but a bit of investigating would figure this out. Alternitavly something like the click smart see this vt...
SCOLMORE GROUP - VIdeos | Watch our latest videos - http://www.scolmore.com/videos/click-smart--wiring-accessories-for-a-smarter-home-/
 
Thank you for the many replies.
Yes. Many alterations have been made... 18 down lights cabled in a ceiling only for client to decide they want 2 x chandeliers instead.
All pull cords deemed 'too clicky' and quieter ones had to be sourced which was fun pulling every variety of pullcord in the wholesaler. Plus loads of other after thoughts...too little too late for most of it.
Pain in the bottom one might say.

Has anyone used the ' Philips hue' set up ?
Is this a good method for obtaining lighting control for the hall and landing light ?
 

Reply to faffing with 2 way lighting in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock