I'm putting up a pegboard in my garage. There is one outlet behind where it will be. I bought a 12 outlet strip to mount on the wall. There will only be a 1/2" space between the wall and the pegboard, so if I plug the strip in, the plug will stick out too far. Is it safe to cut the plug off the strip and hardwire it inside the wall outlet box?
Discuss Hard Wiring External Power Strip in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Hard Wiring External Power Strip in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
I may have posted this before but not sure if it made it in.
I want to install an EV Charger in my garage. The panel is two stories up and the...
Mobile home outdoor power supply is a pedestal that power to the mobile home plugs in much like an RV. The main power supply into the mobile home...
Before I pay an electrician to come check my work, I thought it worth a post here.
I don't want to pay the cost of a small car for a whole-house...
Hi, just helping someone out and apologies for the long winded post.
Would like install a couple of weatherproof double sockets on the patio.
1...
I've purchased Lepro 15m LED strip lights - product code PR410047-RGB-UK, and have fitted them at the top of the walls in my daughter's bedroom...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.