Discuss help needed lighting in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

1983

-
Reaction score
34
hi all i need somehelp please my mother in law asked me to look at her lights as im a traniee electricians i fort i give it a go she has two standard light fittings celing rose which operate from one sw the problem is when the swicth is on both lights come on when you swicth it off only one goes off. i have an idea what the problem is but i fort id get advice from you profesnalls
 
hi all i need somehelp please my mother in law asked me to look at her lights as im a traniee electricians i fort i give it a go she has two standard light fittings celing rose which operate from one sw the problem is when the swicth is on both lights come on when you swicth it off only one goes off. i have an idea what the problem is but i fort id get advice from you profesnalls

If this is not a joke- then its your switch wire. bell it out. how much of a trainee are you? find a lighting diagram.
 
Sounds like you've connected the second light to the supply side rather than the switch line return side in the first ceiling rose, if the second light stays on all the time while the first swiches on/off.
 

Reply to help needed lighting in the Electrical Wiring, Theories and Regulations area at ElectriciansForums.net

Similar Threads

Hi I'm in need of some advice. First of all i'm not an electrician but do have an understanding of electrics as i come from an electronics...
Replies
4
Views
565
Hi Guys I've fitted a few emergency lighting circuits to both domestic and commercial installs before, I've come across one I can't get my head...
Replies
19
Views
1K
Hello, I’m trying to change a pendent light, I’ve wired it the same as the previous light that was on there however the light is now permanently...
Replies
27
Views
2K
Hi, have an old bathroom fan. Which has two wires the black and red (line and neutral). The fan has no isolator switch and was powered when the...
Replies
3
Views
633
As the title says. But then I cut off a jst connection off one of the light strips and I can't get them to work together... the one strip is plug...
Replies
1
Views
479

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock