How to use a Lipo battery to power a carcam

[MistysMike]

Hello

I am hoping someone can point me in the right direction. I have 4 x new Lipo rechargeable batteries 2900mAh 11.1v (32Wh) 35C constant and 65c discharge bursts (?? pass!). I would like to use them to power a car cam (not being used for a car) which has a micro power connection (like a USB with a kink) Can it be done as the cables are different sizes. I would appreciate advice so much as I havent a clue.

Thanks

 

[DPG]

If the overall voltage from the batteries is 11.1V then you should be fine to feed this into a standard car dashcam power adaptor - this will regulate the voltage down to the 5V that the camera needs.

 

[MistysMike]

If the overall voltage from the batteries is 11.1V then you should be fine to feed this into a standard car dashcam power adaptor - this will regulate the voltage down to the 5V that the camera needs.

Fantastic. Thank you very much DPG!