- Reaction score
- 5,382
or (R1+R2)..
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss Installation Method in the UK Electrical Forum area at ElectriciansForums.net
Reply to Installation Method in the UK Electrical Forum area at ElectriciansForums.net
Similar Threads
Hi all, just a quick one on an earthing arrangement for a radial circuit on a wooden workshop I have just had installed.
I have run a 3 core 2.5mm...
Hi,
I have a Victron Multiplus-II 5kVA inverter/charger with Pylontech US5000 batteries installed in my house along with a 6.8kWp PV array and...
Hello
Need to replace a distribution board in the next few weeks to allow for more circuits to be installed in January.
Existing is a TT system...
Hi, someone has ordered Steel Tape Armoured cable instead of SWA. Can I use this armour as a CPC the same as SWA or not and if so is there a table...
Hi All
I wanted to ask a question about the reference method.
Passing wiring through holes made at 0.2-0.4 of the joist span.
The cables passes...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
UK Level 3 Design Project - Design CurrentHi tssxrr, I am also doing my assignment on the same topics. would you mind sharing the...
- Latest: pokharalake
-
32 amp 3 phase socket, 300ma RCDAs per above from Dave. Swap to a 63A outlet and problem goes away. What gets plugged into it...- Latest: Rockingit
-
What equation can be used here to find the value of the capacitor?Hi all, I'm struggling with these questions for this circuit as the equations I have in order...
- Latest: Joshbessant2
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.