Installing a wireless/radio switch - help!

[Mike S]

Hi
I'm installing a wireless switch to control a bird box camera. Roughly the circuit will be:

camera ---> switch ---> solar charge controller ---> solar panel + battery

The switch is in the attached photo.

Question: do the two black wires go to the camera and the red/white to the battery via the solar charge controller?

Thanks!!!

 

[telectrix]

the 12V + goes to red. 0V to one of the blacks. camera supply is 12V +on white, 0V on the other black. ofyouget a multimeter on ohms, you'll probablyfind the 2 blacks read 0 ohms between them. idf so, either way round is OK.