Advertisement - Content continues below
Advertisement - Content continues below

Discuss Installing a wireless/radio switch - help! in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:  American Electrical Advice Forum

Hi
I'm installing a wireless switch to control a bird box camera. Roughly the circuit will be:

camera ---> switch ---> solar charge controller ---> solar panel + battery

The switch is in the attached photo.

Question: do the two black wires go to the camera and the red/white to the battery via the solar charge controller?
IMG_1362.JPG
Thanks!!!
 
Wetroom Store - Network Wetroom Suppliers
This official sponsor may provide discounts for members
Advertisement - Content continues below

telectrix

-
Mentor
Arms
Esteemed
the 12V + goes to red. 0V to one of the blacks. camera supply is 12V +on white, 0V on the other black. ofyouget a multimeter on ohms, you'll probablyfind the 2 blacks read 0 ohms between them. idf so, either way round is OK.
 
SuperlecDirect - ElectriciansForums.net Electrical Suppliers
This official sponsor may provide discounts for members
Advertisement - Content continues below

Reply to Installing a wireless/radio switch - help! in the Electrical Forum area at ElectriciansForums.net

Bulk Workwear - Clothing Suppliers for the Whole Forum Network
This official sponsor may provide discounts for members
Advertisement - Content continues below
Advertisement - Content continues below

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
Advertisement - Content continues below
Top Bottom