I have a Powercraft 25-130 welder the selector switch was stuck, it is a 6 position 0-6 Kende Switch with 4 banks,I took it separate and put it back together but what I need to know now is,when the switch is on position 1 what continuity readings should I get between the the different points on I take it bank 1 and the same for the other points up to position 6 on the switch.I have not posted before on this forum but I will try to post a picture of the switch.
If you need more pictures just let me know.
Thanks in advance for any help given.
If you need more pictures just let me know.
Thanks in advance for any help given.