G
Gordon12
Bought a new Tool for pulling 4/0 cable through 2" PVC LB's. This is no piece of cheap plastic, solid Stainless Steel, Lifetime warranty. Check out the Demo video www.tommieslbroller.com
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Discuss New Tool for Pulling Cable through LB's in the Australia area at ElectriciansForums.net
Reply to New Tool for Pulling Cable through LB's in the Australia area at ElectriciansForums.net
Similar Threads
Went back it a house after they upgraded shower to a 9.8kw, pulling 40a constant.
We had wired it with 10sq and 40a RCBO.
10sq Neutral cable...
What can be worse than electrical installations on a farm, or in a pub?...... Chippys!
Got a phone call from my local.... Lights and kitchen...
Replaced our old 240v hot tub with a new one, which also uses 240v for motors, heater, etc, and 120v for low amp LEDs and touch screen control...
Looking for a little advise as I’m not sure what’s happening
So I’m looking at moving a two way light switch probably about 100cm away from its...
Commissioning a busduct. My contractor has installed a 2000amp aluminum Busduct in a 17 floor office tower.
The specifications state you...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
-
Panel voltage differences on same MPP tracker.Hi all, This may is a little odd and may take some getting your head around but here goes...
- Latest: digital_boy
-
Is it safe to plug 2 extension leads into a double wall socket?It is the box room but yea not sure why there's only 1 but we have RCD protection. House from...
- Latest: jaybee1
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.