Discuss Plastic consumer units and how to code them in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

They (if working) may well protect you from electrocution - that's not the same as stopping you getting a shock of course...

From a quick google, seems like electrocution seems to be rare in domestic settings fortunately (< 10 per year), despite the state of some of the installations we see...

Not sure what that says about the relative risks of electricity compared to simple things like stairs that kill plenty of people though.
More people die from electrical fires than electric shock and yet little thought is given to fault currents and fire, all that emphasis is on RCDs as a magic bullet that will magically negate ---- electrical design
 
They (if working) may well protect you from electrocution - that's not the same as stopping you getting a shock of course...
If working properly (average operation time 20ms) severity of shock will be significantly reduced
From a quick google, seems like electrocution seems to be rare in domestic settings fortunately (< 10 per year), despite the state of some of the installations we see...
It is (fortunately) rare. Its strange that we tolerate hundreds of road deaths every year as "normal" but a death by electrocution gets headlines
 
all that emphasis is on RCDs as a magic bullet that will magically negate ---- electrical design
Have noticed how the rcd, s "reputation" varies from country to country, celebrated in one, maligned in the other.
However, whichever way you look at them, they are your only hope in a number of dangerous situations that no other safety measures can negate. Ultimately we have to ask ourselves if those risks are worth spending 20 quid on.
One other point I would like to highlight is the sometimes undervalued role they play in fire prevention. Apart from detecting line to earth arcing greater that 30 milliamps, bear in mind that many line to earth faults will be detected by either an rcd at an early stage of deterioration(heating elements) or by an mcb/fuse at a much later stage of deterioration. The major difference is the degree of current required to clear the fault. Will it be milliamps or hundreds of amps?
In the latter the risk of a potential fire is greatly increased
 
It is (fortunately) rare. Its strange that we tolerate hundreds of road deaths every year as "normal" but a death by electrocution gets headlines

Might be down to the fact that driving licences are easily obtained by anyone who can demonstrate a very basic level of ability. If training cost thousands of pounds and took place over several years, with rigourous assessment of every stage, I'm sure road deaths would be significantly lower.

No one is allowed to perform brain surgery after answering some multiple choice questions, and proving they know which end of a scalpel to hold, yet it seems that people believe they have a God given right to wield several hundred kg of vehicle with impunity.
 
So in most of the UK a "qualification" to "allow" house wiring is not easily obtained by anyone who can demonstrate a very basic level of ability?


The difference would be that domestic installers must demonstrate some understanding of electrical principles, whereas no one is required to learn basic physics before taking to the road.
 
The difference would be that domestic installers must demonstrate some understanding of electrical principles, whereas no one is required to learn basic physics before taking to the road.
You mean the principles and physics of connecting a socket, light switch or a pendant lampholder

I was always told until you pass your driving test you don't learn to drive and the same goes for the electrical industry until you finish your apprenticeship and you are on your own do you learn how to be an electrician as the decision making comes down to you
 
You mean the principles and physics of connecting a socket, light switch or a pendant lampholder

I was always told until you pass your driving test you don't learn to drive and the same goes for the electrical industry until you finish your apprenticeship and you are on your own do you learn how to be an electrician as the decision making comes down to you

Are you suggesting that there is no requirement to learn anything about electrical principles by trainee electricians?
 

Reply to Plastic consumer units and how to code them in the Periodic Inspection Reporting & Certification area at ElectriciansForums.net

Similar Threads

Hi all, Been asked to do EICR on thatched property for insurance purposes, however they will want all C3 codes rectified. Haven't seen it yet but...
Replies
10
Views
1K
Hi, NAPIT report was carried out due to flood, all kitchen appliances, wall/light switches, fire/heaters etc need replacing. The electrician...
Replies
4
Views
903
Another thread asked about two circuits sharing a common multi-core cable and regulation 521.8.1 was mentioned. A friend of mine has inherited...
Replies
13
Views
645
Hello engineers. I did EICR in two bed rented flat in a block of flats. There is old plastic fuseboard just above the entry door. There are only...
Replies
19
Views
2K
Hi everyone Ive just had an electrical condition report conducted on a mixed-use property, and I am extremely surprised that after the last report...
Replies
11
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock