I have a question. I am installing a steam generator. The unit draws 42 amps. I have a two pole 50 amp breaker at the service box per the instruction manual. Used 6 awg. The unit needs a fused disconnect at the generator. I have a two fuse 60 amp disconnect requiring two fuses. My question is what size fuses do I need?
Discuss Question regarding a fused disconnect fuse size in the DIY Electrical Advice area at ElectriciansForums.net
Reply to Question regarding a fused disconnect fuse size in the DIY Electrical Advice area at ElectriciansForums.net
Similar Threads
Hi,
I have lifetime experience (50+ years) in United States with basic knowledge of split phase 120/240 volts replacing wall switches and...
I am planning to go semi off grid with a victron and battery system. The system will be installed in an out building about 20 meters away from...
I will describe my problem in as much detail so you guys might be able to answer my question. I am never home, my Electric bill is $ 28 to $30 a...
I’m running wires to the basement for future basement finishing. I’d like to add two circuits of outlets (one on the finished side and one on the...
Hello All
So I'm not long out of my college days and unfortunately I didn't have a lot of exposure to three phase and commercial wiring systems...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.