Discuss Single phase motor in the Canada area at ElectriciansForums.net

E

elmer phud

Had a few probs with one. Sounded like a phase down. Checked centrifugal switch (full of crap) ran fine without load/gearbox. Put a 4"x4" timber on shaft and stood on it (18 stone) ran fine (load test:rolleyes:) Lesson learned, I need to put weight on:D . Outcome-start cap U/S under working load, not fatty me. Centrifugal switch kicking in and out causing clattering... Took me a hour to sort this, what a dope!:eek: I hate single phase motors, especially in a shed with 11,000 hens!!!!!!:(
 
Had a few probs with one. Sounded like a phase down. Checked centrifugal switch (full of crap) ran fine without load/gearbox. Put a 4"x4" timber on shaft and stood on it (18 stone) ran fine (load test:rolleyes:) Lesson learned, I need to put weight on:D . Outcome-start cap U/S under working load, not fatty me. Centrifugal switch kicking in and out causing clattering... Took me a hour to sort this, what a dope!:eek: I hate single phase motors, especially in a shed with 11,000 hens!!!!!!:(

Single phase motor

''Sounded like a phase down'' if it had a phase down the would be NO POWER to motor at all?:confused:
 
I don't know what a single phase motor sounds like with a phase down.
Simon and Garfunkel made a record of such a machine, but I can't remember how it goes -;)
 

Reply to Single phase motor in the Canada area at ElectriciansForums.net

Similar Threads

I posted a month ago regarding a single phase motor + panel I have been given to try and sort following water damage to the panel. The assembly...
Replies
0
Views
1K
hello!! hope anybody can help me. I have an AC single phase 220v 1.5HP motor that won't rotate when plugged in even when I try to do it by hand...
Replies
5
Views
1K
I am trying to fix a single phase ac motor but need some help. When powered on and put off load, motor humms but doesnt rotate, its sort of...
Replies
22
Views
8K
Brook Crompton Parkinson single phase PD90S (from the 70s) 240v 11A 2850rpm 50hz I'm using it for polishing metal with a tapered spindle...
Replies
30
Views
5K
hi help required if poss? called out machine not running food shredder quite small found 15mf cap lid was cracked (cap no capacitance on...
Replies
6
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock