K
KFH
I use a Fein and have a Festool plunge saw for big jobs. Will try the stanley knife as it is much simpler.
Used the Fein very carefully to cross cut a board and cut through the insulation and sheath of the T&E the previous "electrician" had laid on top of the joist. He had also used the CPC as neutral as he had cut the neutral too short at the metal wall light.
Used the Fein very carefully to cross cut a board and cut through the insulation and sheath of the T&E the previous "electrician" had laid on top of the joist. He had also used the CPC as neutral as he had cut the neutral too short at the metal wall light.