Hi, I'm after some help please.
I have a 21 panel 8.5kw system with 5kw export allowance and a Sunsynk 8kw inverter. The inverter has a smart load ability which I'm hoping will save me buying an Eddi or isolar. From what I gather, this will let me set a surplus load to go to this smart load, so setting up 400w surplus to go to heat the tank for example.
My question is around wiring in the immersion. I assume I'll need a breaker between the inverter and immersion, but more importantly, I'm assuming I'll need to wire it through the secondary temperature failsafe switch? To make sure the temp doesn't exceed if the immersion stat fails.
Any help is very much appreciated.
I have a 21 panel 8.5kw system with 5kw export allowance and a Sunsynk 8kw inverter. The inverter has a smart load ability which I'm hoping will save me buying an Eddi or isolar. From what I gather, this will let me set a surplus load to go to this smart load, so setting up 400w surplus to go to heat the tank for example.
My question is around wiring in the immersion. I assume I'll need a breaker between the inverter and immersion, but more importantly, I'm assuming I'll need to wire it through the secondary temperature failsafe switch? To make sure the temp doesn't exceed if the immersion stat fails.
Any help is very much appreciated.
