Discuss suplementary bonding again in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum


Yes, but it seems to be splitting hairs for dubious reasons.

Are we really likely to get a reading between 22 and 23 k
Ω?

If it were 22.1kΩ would you test the customer to make sure they don't have a low resistance?
 
I can't see what's dubious about what it states in the guidance notes.

It does seem a little odd though, if the body resistance is reduced from a dry resistance of approximately 1k ohm to a wet resistance of something in the order of 100 ohms which might be the case in a bathroom location.

Having said that it wouldn't be in the Guidance notes if there was a probability of shock.
 

Reply to suplementary bonding again in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock