Trunking size estimate ???

[MrShine94]

Hi, does anyone think they know this size of this trunking just from the image. The conduit is 20mm.
[automerge]1590221619[/automerge]
I believe it's schneider trunking.

 

[westward10]

50×50 at a guess.

 

[telectrix]

3 x 3 IMO. (Thats 75 x75 to you metrimaniacs)

 

[Dustydazzler]

looks like 50x50

 

[Risteard]

Looks like 2" x 2" to me.

 

[davesparks]

This is a fun game, do we win a prize if we get it right?

Or do we just get to have a good laugh when you order parts based on our guesses and they then don't fit?

I'm going to guess that it's 2"x2" Marshall Tufflex

 

[littlespark]

lost your tape measure or something?

 

[MrShine94]

Photo was taken from job a while ago forgot size of trunking.

 

[ipf]

lost your tape measure or something?

Or 2.5 times the conduit diameter, maybe?

 

[DefyG]

50x50. Dont think it would be 40x40 judging by the 20mm conduit.

 

[NDG Elecs]

Can I answer in fractions...



Sorry too much homeschooling shenanigans!!


I think 50x50 too.

 

[h901]

Looks like 50x50

 

[ipf]

It's definitely not mini trunking (40x40). Look at the Tee.

 

[DefyG]

Looking at what looks like a spare bit or preformed section by the CU, it looks wider than it is deep so maybe 75x50?
From posts on here it’s pretty inconclusive, think the op will have to return to site with his tape measure!

 

[Dustydazzler]

Looking at what looks like a spare bit or preformed section by the CU, it looks wider than it is deep so maybe 75x50?
From posts on here it’s pretty inconclusive, think the op will have to return to site with his tape measure!

after a second look it could well be 75x50

 

[ipf]

Looking at what looks like a spare bit or preformed section by the CU, it looks wider than it is deep so maybe 75x50?
From posts on here it’s pretty inconclusive, think the op will have to return to site with his tape measure!

On the box?......2x2 jointing pieces. Compare them with 3 cb's in the CU.