F
Fury84
Firstly hope I have picked the right category......
A friend of mine bought new switches for his kitchen and having been unsuccessful at changing one of the light switches asked my advice but I too am stumped! He has a 3 gang switch which controls 3 different lighting circuits within the kitchen, one of which was wired for two-way switching.
Coming in are 3 x twin and earth for each individual lighting circuit, 1 twin and earth for the supply feed and a four core cable for the dual switching which goes to a single socket by the door.
To save huge explanation I have found a diagram on the net of how I wired the switch below before attempting to add the two way switching and everything worked fine. So, at this stage the only unused wire was the 4 core cable but I could just not figure this out.
Could anyone explain what I need to do? I understand the two way switching will only work on one of the lights but how?
Any advice appreciated.
A friend of mine bought new switches for his kitchen and having been unsuccessful at changing one of the light switches asked my advice but I too am stumped! He has a 3 gang switch which controls 3 different lighting circuits within the kitchen, one of which was wired for two-way switching.
Coming in are 3 x twin and earth for each individual lighting circuit, 1 twin and earth for the supply feed and a four core cable for the dual switching which goes to a single socket by the door.
To save huge explanation I have found a diagram on the net of how I wired the switch below before attempting to add the two way switching and everything worked fine. So, at this stage the only unused wire was the 4 core cable but I could just not figure this out.
Could anyone explain what I need to do? I understand the two way switching will only work on one of the lights but how?
Any advice appreciated.