building

  1. KevinH

    Floor sockets + Building Regs

    I am 1st fixing an extension and in one area there is no wall space (glass walls like a sun lounge) for any sockets although customer insists he wants a power point in the corner. I suggested a floor socket as the floor is due to be insulated and screeded. The customer sounded happy with that...
  2. D

    TT in agriculture/ building site/ caravan.

    Hi guys, New job looking at. I haven’t been to site yet, but this is the scenario. DNO just put a new single phase supply into a field PME. Line and neutral tails terminated into a double pole isolator/ no earthing cable installed yet/ no cu connected yet. I have been asked to fit board and...
  3. I

    TIPS? Running Neutral Wire in Old Conduit NYC Building approx 1950

    Hello! I am setting up a smart home system and will need a neutral wire for the application. Some of the existing switches to be replaced only have 2 wires. I believe I will need to run my own neutral line through the existing conduit. I have done so before and just used a stiff wire with...
  4. Jimjamyaha

    Building control / works certificate

    Hi, In 2005 would building control / works certificate have been required for a new / extending kitchen wiring, new ceiling lights and oven installation? In 2007 would building control / works certificate have been required for new ceiling lights, sockets, replacement of electric shower and...
  5. S

    Installing fibre from external man hole to inside building

    I currently have a large project coming up in which my company has asked me to install fibre into several buildings from external man holes, which will be dug out and installed by contractors. My intention on most is to come up the external wall using a security grade channelling from ground...
  6. bigspark17

    De stratification fans in storage building.

    Any one familiar with these and fitted any recently.? Looking for reputable brands and ideas on there control. Warehouse is used for individual self contained storage units.
  7. R

    Electrical Install in a Small Office Building

    Morning all, I'm new to the forum but just after some advice. I've been asked to price for an install on a small Office (12 desks over 3 floors of a 150 old building). Its for a firm i've done electrical work for for years so i'm happy to take it on. Its been a while since I did an office...
  8. dinger809

    Building Inspector/18th Edition

    Hi all, I had the following situation arise and was just wondering what others’ views were Doing a new build, started November last year. Although done tray and basket, I’ve run some cables a short distance across ceilings using cables ties. I’ve used metal fixings, nailed in with a Spit gun...
  9. N

    Running workshop power from another garden building

    I am setting up a new garden workshop. I plan to fit a simple 3-way consumer with RCD in the workshop and running power though an armoured cable from another garden cabin. The garden cabin already as a 32A feed and a consumer unit, but I am unsure of how to run the feed off this consumer unit to...
  10. O

    Limited Space For Out building supply

    Hi all, I am looking a installing a new supply to an out building, but very limited in space in electrical cupboard. Could you use a double pole mcb in place of a switched fused disconnect ? If not could you please enlighten me as to why. Thanks all.
  11. Simon-0116

    Building regs part p - latest.

    Anyone no latest list/ edition of noticeable work to building control, part p. Newest one I can find after a quick Google is 2013. I'm sure it was updated 2017. If so can someone post a link, Thanks.
  12. Top Cat

    Transportable building Periodic Inspection Report

    Long time, no see! As above, has anyone got a template for one? Cheers
  13. cliffed

    Temporary building supplies again

    just wondering how you guys,install temp electrics to portacabins Seen a lot of installs on sites & at schools where I don’t think it’s correct. Mainly earthing,& earthing conductors,or am I being over cautious,cheers.
  14. A

    Swimming Pool Building in a Building

    Hi guys, Another question for those who've ever had this issue or experience with pool installations. I'm due to begin work on a timber framed building inside a steel framed building housing a swimming pool. The cabin would be mostly in Zone 2, potentially overlapping Zone 1. Would this cabin...
  15. D

    Permanent Diesel Generators Installed Inside a Building

    Do somone know requirements for Permanent Diesel Generators Installed Inside a Building ?
  16. A

    AFDD, Building Regs and Insurance

    Hello all. New here so i may get flamed if this is covered somewhere else, but I've been scouring google for ages without any conclusions. I'm of the understanding now that AFDDs need to be installed in certain locations, sleeping accommodation being the one I'm interested in as it constitutes a...
  17. cprfenom

    extending the earthing arrangement for a steel framed commercial building under 18th edition

    Hi Guys, This is my situation: Existing brick building demolished and replaced with steel frame, steel panel clad warehouse/storage structure. Original building had two electrical supplies: 1 x 63A single phase and neutral via 3 core PVC SWA PVC 1 x 100A TPN via 4 core PVC SWA PVC plus equal...
  18. S

    HNC Building Services Engineering / Elec & Elec

    Hi all. I have been trying to do some reading up on my options for possibly doing a HNC next year. I had originally looked at doing a HNC in Electrical & Electronic Engineering as it seemed the most logical step forwards from my current qualifications as follows Apprenticeship NVQ L3 2391...
  19. Gavin John Hyde

    Part F building regs...................

    Had an email from some outfit suggesying to keep building control happy we sparks should do a course to certify our extractor fans, cooker hoods etc.. never been asked for one yet but maybe one day i will. If i recall in the niceic online portal there is a form dv1 for certificating such things...
  20. S

    Problem Building my own electric skateboard

    Hello, I bought a motor for the skateboard and a ESC to control the speed , so i found this (80A) and bought it . someone told me that the motor and the ESC do not fit together and it won't work for me , is it correct ? and if so what cheap ESC do you recommend? thank you :)
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert

Back
Top