charger

  1. Peter55

    Earthing question - three phase into main building, then single phase to EV charger

    Hi there, new to the forum and in final stages of completing C&G level 3; need to complete design project to complete. Am struggling to get my head around how to draw up correct circuit diagram showing EF Loop path for EV charger where initial supply is described as 'three phase TNCS' feeding to...
  2. P

    Bought 32A EV Charger, need to Change CEE plug to a USA Range plug.

    Hi, I Bought a 32A EV Charger, it comes with a CEE wall plug. I need to use it with a 60A range recepticle which I use to plug in my welder. So obviously I need to change the CEE plug into a Range plug. There is no paperwork, no schematic. As the CEE has 3 wires Red, Black and Yellow/green...
  3. P

    EV charger hacked for fun

    Just saw this on BBC news: https://www.bbc.com/news/uk-england-hampshire-61006816 Now re-directing to a pr0n site looks like a prank rather than a serious attempt to cause michief, but it got me wondering if chargers with internet access are being abused in more cunning ways?
  4. W

    Outdoor 230 EV charger with 115 V outlet: supply through conduit . Does this plan make sense?

    Hi! I’d like to install a pedestal-mounted (230 V, 30 A max - programmable) EV charger close to my driveway, which ends about 12 feet away from the house, on the other side of a landscaped rock wall of sorts. While I am at it, I would like to oversize the circuit to allow a second EV charger to...
  5. bigspark17

    Rolec ev charger tester and ics ev charger

    I have a rolec ev chargpoint tester. Been asked for an ics ev chargpoint to be installed. Anybody know if the tester is compatible for the ics model please :)
  6. K

    Are further qualifications required to install an EV charger?

    I am a fully qualified electrician with level 3 nvq / 18th edition. Are further qualifications required to install an EV charger?
  7. HappyHippyDad

    Installing a 3 phase rapid EV charger?

    A bit of an embarrassing question. I have a regular customer who I enjoy working for. He has asked me to install an EV rapid charger for his avant loader (electric tractor type thing). I always turn down 3 phase jobs as I don't feel I understand it fully, but I'd like to do this job. I believe...
  8. T

    Anyone with experience of EV charger courses?

    Hello again! Has anybody got any experience of EV charger installation courses? there are plenty about if I google it, of course, but would like to hear from anybody who has been on a course and found it helpful or otherwise! Many thanks
  9. P

    Do I need to install an RCD for a Hypervolt EV charger

    Hi, Am I correct in saying I can install a single pole Type A 30ma RCBO to feed an Hypervolt EV charger? the supply cable is SWA and the Hypervolt has in built 6ma DC RCD protection. The consumer unit is a Lewden board so would ideally like to install a SP RCBO type A, any issues with this? its...
  10. S

    Car Charger 6mm SWA cable Query - Loft Insulation

    Hi We recently had an 7kW EV charger installed. Due to the consumer unit being situation within the kitchen of our bungalow, the cable needed to be routed across the loft in order to end up next to the drive, The contract was with a well known brand, who has sub-contracted out the...
  11. P

    Battery tool repair advice for a battery charger

    I have a mapole 12/24v battery charger 2014 model approx.it will not charge it switches on and lights up the transformer is buzzing but no life at the 12/24v have cleaned all connections I removed the rectifier so how do I test it or just buy a new one thanks petekay
  12. P

    Installing a plastic CU for a vehicle charger

    I'm looking at installing a plastic distribution board to feed a 3 phase vehicle charger. I've never been clear on whether flats being present in a building automatically make the rest of that building count as domestic or not. My understanding of 421.1.201 is that it does. The install...
  13. G

    Installing an electric toothbrush charger

    I want to install a wall mounted toothbrush charger alongside a washbasin in a bedroom. Depending on what turns out to be the easiest option for routing the cable I intend to either wire this into the lighting circuit, which is protected in the CU by a 6A circuit breaker or take a spur off the...
  14. C

    Tesla EV charger on new distribution board

    Hi all, Will have to apologise for asking basic questions but would rather be sure. I have got an EV charger circuit to be fit in an upgrade consumer unit. The wall connector features built-in RCD Type A + DC 6mA so it is not required to install RCD type B. The board will be 100A main...
  15. K

    UK Electric Car charger Location

    Hi Thanks for providing the forum... Wonder if anyone here knows the regs on the installation of a 7Kw car charger, in so far as where it can be placed. My indoor consumer unit, has a 7K shower in it, upgrated by housing assosiation they fitted rcd on lights... Im thinking its too far away...
  16. D

    EV charger considerations on TT supply

    Hi all. Will have to forgive me for enquiring about basic question but would rather be sure of all considerations than not. Went to view property for potential EV install yesterday. On viewing intake of property I realised supply had been converted from PME to a TT supply. I'm unsure why they...
  17. R

    Wallbox EV Charger and Power Meter

    Has anyone installed a Walbox EV Charger with a Power Meter to enable the Power Boost option? It's installed but there doesn't seem to be any way of confirming that the Wallbox is talking to the Power Meter. I spoke to Wallbox and they couldn't help.
  18. G

    Battery Mikita DC18RC Charger, 3.0Ah 18v Battery question?

    I am very confused by this charger. The yellow LED in on, Battery Conditioning. What does that mean? Battery is fully charged, I think after 30 minutes. The yellow LED is still on. Makita needs to provide better documentation. Their lead blower runs out of juice on high after about 15...
  19. R

    Nissan Leaf 22kw granny charger?

    My Dad is picking up a Nissan Leaf. He is planning to charge it using the granny charger as we have a socket in the porch. Can anyone recommend a decent fast charger and what would I need to install one?
  20. HappyHippyDad

    7kW EV charger charging at 2.5kW?

    I have just installed the ohme 7.4kW home pro EV charger. I plug the car in and it starts charging at 7.4kW, then slowly the charge drops. Perhaps over the space of 45 minutes it has gradually decreased down to around 2.5kW. There is no CT clamp attached so no load balancing. It is also not...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert