hand

Recent contents Top users
  1. Y

    Hand Dryer Heights

    Hi guys, Does anyone know of the legal minimum/maximum heights for hand dryers in; 1)Normal WC's 2)Disabled WC's 3)Childrens WC's We fit alot at work and it's one of those things that nobody seems certain on the heights. Had a quick flick through the regs and OSG and can't find them. Thanks James
  2. b-spark

    Does the melsec fx-10p hand held programmer control run/stop?.

    Hi, abit of a problem. Having to program a Mitsubishi fx 128mt ess plc. Don't have any disks just wondered if the hand held can make it run and stop as we have one. These types don't have a switch on the unit and are quite old. If so how? It's in stop mode, so have programmed my ladders just...
  3. J

    Striking a domestic power cable with a "kango" or hand tool

    Which is best? Obvioulsy neither, and we have measures to isolate supply and have conducted risk assesments etc... My question is, if you were to strike a 230v power supply with say a 110v "kango", and were holding the handle, would the tool / cables / transfromer give a route to earth this...
    • jonesinamillion
    • Thread
    • cable domestic earth electricians' talk hand insulated power tool
    • Replies: 11
    • Forum: Domestic Electrician Forum
  4. M

    Hand off auto switching

    Ok folks, Here it goes, feedback will be greatly appreciated. I have to two lighting circuits broke through two contactors, the control circuit is broke through a hand off auto switch at the minute, however I have to install a one way switch at a communal point/landords, etc. I have ran a twin...
  5. Goody

    Rechargeable Hand Torch from Lidl

    Hi, Just bought a Rechargeable Hand Torch from Lidl and in my opinion it's good value for the money and far better than the ones from B&Q or Wickes. Would be useful in lofts or any dark corners. LIDL Great Britain - lidl.co.uk
    • Goody
    • Thread
    • aus electricians' talk hand torch
    • Replies: 1
    • Forum: Australia
  6. J

    PAT testing hand dryers, water heaters etc??

    Hi all I'm wondering in anyone can enlighten me please. I did the PAT testing course a few years ago and have never really used it since the course. I had an enquiry about testing some hand dryers, waters heaters and similar in a local office. I thought PAT....portable appliance, hand...
  7. T

    Looking for 2nd hand PAT tester any advice

    I have been looking for second hand PAT tester. Do any of you have any advice on which one any information would be great as new to this line of work.
    • topcat
    • Thread
    • advice electricians' talk hand looking pat pat tester pat testing tester
    • Replies: 6
    • Forum: Electrical Tools and Products
  8. P

    NVQ 3 Urgent help needed hand in tomorrow any help would be massively appreciated

    brand new to this forum so hi guys, names Phil i'm 20 nearly 21 and have been working in electrics for nearly 4 years now. i'm due to be finished up as there is no work left with the company i work for. i have completed half of my NVQ but i could do with some guidelines to complete the other...
  9. G

    the things you find at the second hand market

    not at work today boys n girls so thought i`l take a wander down the hill to the second hand market in town....as well i did n all really as i managed to pick up an unused tyco T107M label printer for £15 which after a bit of internet research turns out to be a badge engineered rhino...
    • GLENNSPARK
    • Thread
    • aus electricians' talk hand market second things
    • Replies: 2
    • Forum: Australia
  10. B

    Redring shower turns on when hand blender turned on!

    Hi all! I am from the plumbing forum, but thought I would ask if anyone has seen this before? I had a quick look at a Redring 9.5 expressions shower that had totally stopped, yesterday. Then the owner said it starts & pulses when his wife uses a hand blender in the kitchen! Couldn't believe it...
    • Best
    • Thread
    • aus electricians' talk hand shower showers spark turned when
    • Replies: 7
    • Forum: Australia
  11. N

    Avon prime line hand dryers

    Anyone know who sells these, I need a replacement and a quick search on the Internet has not helped. Any ideas?
  12. S

    Hi Could do with a hand please

    Hi guys My name is Steve and i have done and completed my 2330 level 2 and 3, my 2382 and also have a Cscs card. My dream is to be a fully qualified electrician. I have been working installing and fitting bathrooms for the past 3 years but with little chance to progress any further within...
    • santa1981
    • Thread
    • aus electricians' talk hand please
    • Replies: 7
    • Forum: Australia
  13. K

    Left hand rule

    An extract from a letter I wrote many years ago based on American recommendations. With any HV / LV switching operations follow the “Left hand rule”. IE Never operate a switch with your body directly in front of the switch. If the operating handle is to the right of the switch, stand to the...
  14. S

    Anyone recognise this hand tool, please?

    I was trying to remove some very stubborn cable clips from a nicely painted wooden surface - doing as little damage as possible, which wasn't easy as this was panelling close to wall. I remember seeing somewhere what looked like a large flathead screwdriver, only the business end was curved up...
    • sparc
    • Thread
    • anyone aus electricians' talk hand please recognise tool
    • Replies: 10
    • Forum: Australia
  15. Energetic

    Would you buy a second hand inverter?

    I have someone thinking of swapping a 3000TL out for a system that can charge batteries and island. Is there a second hand inverter market and would you buy a nearly new model? Or is there a system that can do this and is compatible with a 3000TL? Cheers... PS we didn't do the original install...
  16. D

    Anyone need a hand in Norfolk?

    Apologies if this is in the wrong place! I am looking for some Saturday/Weekend work so i can brush up on domestic, I have c & g 2360 pt 2 was 16th qualified and studying for 17th and 2391 also have other quals in electrical engineering ONC, HNC, NVQ 3.My experience is in factories doing...
    • dasrik
    • Thread
    • anyone aus electricians' talk hand
    • Replies: 3
    • Forum: Australia
  17. shanky887614

    tool kit - hand tools mainly

    im going to be starting an apprenticeship soon (sorry for my poor spelling and grammer) i have some tools that i bought for college but there not insualted so i dont really want to use it and buy all new stuff what screwdrivers,pliers,side cutters,hacksaw's do you guys think i should go for...
  18. M

    i need a hand with an annoying clicking noise!

    Alright sparkies, Got a bit of a problem with a light I was asked to have a look at today, I didnt have time to investigate as I had to shoot off to another job. Anyway, theres a light fitting in an entrance hall to a swanky office building which is switched via a 360 degree PIR mounted on the...
    • mike2790
    • Thread
    • aus clicking electricians' talk hand noise
    • Replies: 16
    • Forum: Australia
  19. E

    Cash in hand

    Just wondering if this industry still has a problem with cash in hand labour? In my area this was rife. In this case the cash in hand wasn't usually enough to be paying tax. You ended up on an apprentice wage of about £60 for 3 days work. Cheap labour, but to the lads (16 straight out of school)...
    • Electricalserv
    • Thread
    • aus electricians' talk hand
    • Replies: 4
    • Forum: Australia
  20. R

    PAT On A Hand Dryer

    Anybodys thoughts on this hand dryer ive come across? Came across the hand dryer doing some PAT in some offices. The hand dryer has been put onto a plugtop in a toilet, which i know should really be into a fused spur. Thing is its connected to a RCD socket above which is on its own dedicated...
Best EV Chargers 2025
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Green 2 Go Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses Heating 2 Go
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

TrueNAS JBOD Storage Server

UK Tiling Forum | Tilers Forums
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Electrician Tips from Professional Electricians
JBOD Forums: a forum for JBOD storage server advice
JBOD Suppliers: JBOD Storage Server Supplies
Back
Top