risk

Recent contents Top users
  1. Rooster

    RCBO's are suppliers taking a risk

    There talks that campervan electrical suppliers, like Truma, Sargent, Powerpart, etc are supplying electrical consumer units or control systems with 240v systems illegally as they do not meet the 18th edition, section 721 on motorcaravans where in a fault, both live and neutral must be...
  2. Khanzada

    Risk assessment template

    Hello to everyone If anyone have a up to date risk assessment template for domestic installation, have an assessment in two days . Thank you.
  3. newfutile

    EVSE risk assessment

    I have been tasked with inspection of testing of our 2 vehicle charging points. other than the standard ZS and rcd times , does anyone know what additional testing may need to be conducted? also we have a TNC-S supply with an outside metal tap about 2.5 metres away from 1 of the chargers , is...
  4. R

    Risk Assessment for Working at Height

    Ive got to complete a Word Document regarding a Risk Assessment for Working at Height. Would anyone be able to give me pointers. It only has to be brief then all of the tables will be filled in. Ive not done one before, so I am in need of some advice if possible?
  5. K

    How do you achieve shock risk protection in TT

    Hi everyone I posed a question to my teacher when I was in Level 3 about if we do not use 30mA RCD for additional protection in TT system and use 100mA for fault protection then how do we stay protected from electrical shocks to which he said RA*IA>=50V something like this and when I said could...
  6. R

    Is someone trying to rip a customer off? Advice on a Fire Risk Assessment

    Hi So a customer of mine has just had his fire extinguishers tested and for some reason the guy doing the fire extinguisher check removed this 600x600 flat LED panel and looked above it and said that what he sees is not safe and it's a fire risk. He proceeded to quote £600 to have 7 of these...
    • robbo777
    • Thread
    • advice assessment commercial customer fire off risk someone trying
    • Replies: 10
    • Forum: Commercial Electrical Advice
  7. K

    Risk Assessment for Am2

    Hello everyone, I am new member to the forum - not sure how forums work, if I'm posting in the wright place or not etc.. Anyway I was wondering if anyone could help me with the risk assessment for the AM2. I can't think of more than 3 really, I know this is easy but I always overthink the...
  8. A

    CRL risk asseament.

    Hi guys, Anyone know of any templates for risk assessments for spd protection? Been reading up on it and been told I need a crl risk assesment. If anyone can help that would be great. Cheers
  9. S

    RCD omission risk assessment

    Hi guys does anybody please have a template risk assessment for the omission of RCD protection? Or does anyone know where I may locate one? Many thanks in advance.
  10. G

    Health and safety and risk assessment for one man band

    Morning all I know the questions probably been asked a lot. Basically I done some work for a company last month and put my invoice in at the start of last month now there asking for health and safety policy and risk assessment. What's the score being a one man band solo trader.
    • Gene Powell
    • Thread
    • assessment health health and safety risk safety
    • Replies: 17
    • Forum: Business Related
  11. C

    SPD risk assessment template

    I am due to carry out my first fuse board change under the 18th edition, i need a risk assessment template for SPD devices. and with regards to AFDD i am under the impression i just need to recommend it in the quotation.
  12. T

    What S.I. under risk assessement for omission of RCD in regs

    Ok so as I am moving VERY soon I have packed and sealed all my electrical books away. I don't have access to regs consequently. I am racking my brains regards risk assessment for omission of RCD on sockets. If you read the fine print it references a statutory instrument regards the standard this...
  13. T

    Rubber grommet on new consumer unit install - fire risk?

    Hi All, Just looking for some advice, had a new CU fitted and the installer incorrectly drilled a cable access hole in the side of the CU. Once he noticed the mistake he just fitted a rubber closed grommet. I'm a little unsure if this meets the requirements as surely the whole point of the...
  14. J

    At risk of sounding an idiot..

    I went to do a simple job today, change a 5ft tube for an led fitting. Changed the fittings, wired it, powered up and then nothing. The fitting is definitely working. Checked the voltage, was around 110v at the fitting. Check the switch and got 230v. Figured it was the switch so I took that...
  15. bigspark17

    Editable h&s policy and risk assesments

    As per title does anyone have editable generic risk assesments and health and safety policy that they can post on here or pm me.. Thanks in advance :)
  16. M

    Stroma Certification Scheme Stroma Assessment require a risk assessment and health & safety policy

    Good Morning All Can anyone recommend any templates for a risk assessment and Health & Safety policy for my Stroma Assessment please. Thanks
  17. Pete999

    Possible fire risk? methinks

  18. A

    Urgent Question about fire risk following leak

    hello, Our bathroom was installed professionally 4 weeks ago in a 1st floor flat, tonight our neighbour from the flat below came upstairs and advised us that water was leaking through 3 of his light fittings. I've captured it on video. The plumber came out and fixed the leak, however, we are...
  19. D

    No RCD Risk Assesment

    hello chaps, I have a battle going on in a new position I am employed in with the statutory compliance manager, i have advised him that dew to the new 3rd amendment all 20amp sockets are now required to be protected by an RCD, I have added an extra socket to an existing ring which has no...
    • dean7828
    • Thread
    • additional assesment assessment no rcd protection rcd risk socket
    • Replies: 15
    • Forum: UK Electrical Forum
  20. F

    Worth the risk?

    Hi guys, first time caller... I just acquired a broken fan. It's big, about 15" in diameter, had its own stand (though not strong enough, hence the breakage) and the current went through a circuit board in order to change by remote control which of three speeds it operated at, and for how long...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Daily, weekly or monthly email

Receive a daily, weekly, or monthly email containing a digest of new and recently updated threads.

Advert

Tilers | UK Tiling Forum | Tilers Forums | Find a Tiler
UK Tiling Forum by Tilers Forums UK
Plumbers Forums | Plumbing Advice | Gas Forum
Gas Forum | Unofficial Gas Safe Register Forum
Workwear Shropshire
Top Bottom
Back