360 PIR 2way

[sjhall]

Alright Chaps, I've a long corridor in an office block that I'm fitting some 360 PIR sensors to the lighting, I need the lights to come on all at once for all locations of the corridor but there is a blind spot so I'll need to fit 2 sensors... Is there a sensor out there that you can link another one too, or is it just a case of wiring in 2 standard pirs

Cheers

 

[Hawkmoon]

Just wire in parallel as you would Columbus type switches

 

[telectrix]

what he said ^^^^^.

 

[sjhall]

Thanks, just wanted to double check 1st

 

[dazza1981]

Yep parallel them up.... and any sensor thats triggered will activate the lights

 

[Pete999]

What they all said

 

[camerabloke]

What Pete said ^^^^

 

[7029 dave]

^^^^ yep that way.

 

[Brightspark2]

I agree with 7029 dave...

 

[Pete999]

So we all agree then is that right?

 

[telectrix]

just imagining if the sensors were 2 way. 1 guy walks into corridor- lights go on. another guy walks past - lights go off. much fun.

 

[uksparks]

Take a look at this thread I started a couple of weeks ago:

http://www.electriciansforums.co.uk...rum/88500-wiring-2x-pir-security-light-s.html

 

[telectrix]

Take a look at this thread I started a couple of weeks ago:

http://www.electriciansforums.co.uk...rum/88500-wiring-2x-pir-security-light-s.html

View attachment 23839

nice pic. but i'd use a D/P isolation switch in order to isolate both L and N in case of a fault.

 

[uksparks]

Yes that's a good idea.

 

[Hawkmoon]

So we all agree then is that right?

I'm not sure I agree with what I said, but having reread it carefully I now see what I mean