5.0 Distribution circuit section, N/A on paperwork?

[Brownie91]

Hi all,

This may be a silly question but here goes.

When completing an inspection report for a small domestic installation (EICR not install). Would you mark all tick boxes under 5.0 Distribution circuits as N/A seeing at this is for a circuit/wiring feeding another distribution board?

Thanks

 

[Flanders]

I would use a domestic EICR template but if that's all you have then yes put NA for distribution circuit inspections

 

[Brownie91]

I would use a domestic EICR template but if that's all you have then yes put NA for distribution circuit inspections

Thanks bud.