Discuss Brother P-Touch label printer cartridges. in the Electrical Tools and Products area at ElectriciansForums.net

I was going to post this exact question as got a Brother labelling machine. I have only used 12mm they say you can use 9mm it this true. I used to get Dyno non-genuine ones of that make and were ok for labelling up sockets but I was always dubious of the length.
 
Genuine Brother tapes but from eBay.

Just stocked up with 18mm black on yellow tape for £7 a cassette (compared to approx. double that from Screwfix etc.)
 
Yes mate i put some thinner tape in mine this time round, i have a budget model and with the 12mm tape even with font set to small its quite large ... Thinner tape got it printing thinner... Amazon i got last ones from
I was going to post this exact question as got a Brother labelling machine. I have only used 12mm they say you can use 9mm it this true. I used to get Dyno non-genuine ones of that make and were ok for labelling up sockets but I was always dubious of the length.
 
I tried compatible ones once.. Out of three cartridges two ended up in the bin pretty sharpish as they snagged up when trying to use them. That was for a brother P Touch.
 
Compatible off Amazon can get a pack of either 4 or 5 for the price of 1 genuine from the wholesaler with no problems.
 

Reply to Brother P-Touch label printer cartridges. in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

Any one know how to get 18th edition templates for the Brother label printer?
Replies
4
Views
2K
Good morning! You lovely people have been so helpful so I'm picking your brains again. Is there any value in getting a printer that can print...
Replies
10
Views
1K
I am fed up with shoddy labelling using stickers with the CU so bought a Brother P touch E110 label printer It has a Faceplate option which...
Replies
2
Views
4K
Hi guys I have some industrial lighting circuits to wire in a workshop and was after some fresh ideas/suggestions as to how i could best do this...
Replies
12
Views
1K
Hey all, I'm looking for some advice to help me troubleshoot my strange issue with my consumer unit/fuse board on which my RCD keeps tripping...
Replies
25
Views
1K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock