cable for Ex socket

[CJY_15]

any one can share what cable should i be using to connect
a ceag 511 Ex socket to DB?

cheers,
JY

 

[lee mcgregor]

hi cjy i currently wire up lots of ex containers for going off shore and use ships braid cable bs6883 www.bs6883.net/ - hope this helps

 

[Spudmiester]

any one can share what cable should i be using to connect
a ceag 511 Ex socket to DB?

cheers,
JY

Have done a good bit of EX stuff in sewers for the water board.

You can use normal SWA, but you need EX glands. Get decent ones by Hawke or similar. They are not cheap though, one gland can be £20.00.
If you need reducers, they need to be EX as well.

You only need the EX stuff at the socket end, as the DB wont be in the zone. (I hope)

You could always do it in pyro !