Discuss DOMESTIC INSTALLER BARE MINIMUM REQUIREMENT in the UK Electrical Forum area at ElectriciansForums.net

I'm not sure what you mean that 'all work needs certifying'' because that isn't the case (I don't certify all work I do).
Anything that involves altering a circuit physically or altering its design needs to be certified. So not all the work you do needs a cert but you probably do a couple of quick tests when you get to a job to for example change over a socket. So pretty much every job required to some degree inspection and testing
 
Don’t forget to spend a couple of minutes reading up on the Health and Safety Act, and the criminal offence of Corporate Manslaughter should a customer be electrocuted by quick, easy installations.
 
Don’t forget to spend a couple of minutes reading up on the Health and Safety Act, and the criminal offence of Corporate Manslaughter should a customer be electrocuted by quick, easy installations.

Perhaps you need to understand the basics of corporate manslaughter:

An individual cannot be guilty of committing, aiding, abetting, counselling or procuring the commission of the offence of corporate manslaughter.
 
New posts

Reply to DOMESTIC INSTALLER BARE MINIMUM REQUIREMENT in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

I did a domestic installers course around 10 years ago (blimey time flies!). This is a level 2 qualification. I then registered with Stroma who...
Replies
3
Views
2K
Hi all, Merry Christmas to everyone, and apologies for talking work during the holidays😅 I have my first EV charger install job early in the New...
Replies
14
Views
2K
NICEIC Certification Scheme Getting accredited to
Looking for some advice regarding joining a CPS. I've been in the electrical industry in various roles for nearly 10 years. I started my...
Replies
15
Views
1K
Happy New Year all. Quick question regarding cable sizing. I have a 25m run from DB to car charging unit. The 25m run will mean approx 8m is run...
Replies
5
Views
680
Hey all, I’m an electricians mate, trying to get fully qualified but struggling. I’ve got my L3 diploma (C&G 8202-30) and 18th edition, I have...
Replies
1
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock