K
kduck
been asked to wire in a mains door bell, would I take 1 mm from fuse box to transformer, then wire in bell wire from there to switch then back to door chime.
Discuss door bell in the Australia area at ElectriciansForums.net
I tried everything and couldnt get a decent "Ding "Dong" i was only getting a "Dong".
I have a TracTR7 bell transformer for the bell no instructions with it. On the transformer its got mains in come with two terminals one says 220 the other 250 do I take a live and neutral to them here, which goes in which. On the output side its got three terminals one with 4V one with 12V and one with 8V do i then take the 4V one to the bell push then to the chime, then is it the 8v straight to the chime to give it 12 volts, is that right???????
you say two core out of the transformer to bell push
Reply to door bell in the Australia area at ElectriciansForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.