Emergency Stop Switch KJD17B NVR Source URL: https://www.electriciansforums.net/forums/electrical-tools-and-products.14/

Discuss Emergency Stop Switch KJD17B NVR Source URL: https://www.electriciansforums.net/forums/electrical-tools-and-products.14/ in the Electrical Tools and Products area at ElectriciansForums.net

A

Andy29

DIY
Reaction score
0
I want to make a power tool extension lead using an Emergency Stop Switch KJD17B NVR. However, this is a momentary switch (not latched) so the supply is not constant. Do I need the switch to operate relays that will feed a constant 240V? What would the wiring diagram be? what relays would I need? where can I get them?
Soz, this isn't clear to me...
Thanks!!
 
Why not use a latching E.M stop button?

What you've listed is Start - Stop , not E.M

https://www.NoLinkingToThis/p/hylec...VjLTtCh1DjgW1EAQYASABEgIDsfD_BwE&gclsrc=aw.ds
 

Reply to Emergency Stop Switch KJD17B NVR Source URL: https://www.electriciansforums.net/forums/electrical-tools-and-products.14/ in the Electrical Tools and Products area at ElectriciansForums.net

Similar Threads

R
Wireless Switches - whats possible in this scenario?
Just need some advice on this one - i wont be doing the work myself - but wanted to understand what could be done in my situation without chasing...
Replies
4
Views
1K
default
D
Z
AM2E and NVQ3 experienced worker route- the unabridged low-down for you
Hello all, I've just been perusing the AM2/E/S threads on here. Thought you might like a bit of a review. If, like I did, you find yourself...
    • Like
    • Informative
    • Winner
Replies
7
Views
2K
Thomas knott
T
udud22
3 Phase Control Relay
Hi, I am new to HV Electrical Stuff. I am trying to use a emergency stop button to kill power to BOX A remotely. The wall socket has 3 phase 380V...
Replies
1
Views
982
Lucien Nunes
Lucien Nunes
Dan
  • Article
UK Tiling Forum | UK Tilers Forum - UK Tiles Forums
Been playing around with a fair few blogs for a while related to this topic. UK Tiling Forum that is. UK Tiling Forum - The Tiling Forum for the...
    • Like
Replies
1
Views
5K
Dan
Dan
G
Washing machine intermittently trips RCD. Manufacturer declares machine fault-free and suggests faulty home electrics. What should I do?
Hi I don’t know how resolve this so any helpful advice would be greatly appreciated. I have no electrical knowledge. I will try to be as clear...
2 3
Replies
57
Views
11K
static zap
static zap

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock