E

Engineer54

Not having done much in the way of conversions of this type, i'd be obliged if any you out there can confirm or otherwise, that standard 12V 60VA TX's are not suitable to drive low wattage LED lamps.

I've been asked by a new friend here, if his shop light fittings that consist of 4 X 50W halo lamps can have direct replacement of 7.5W LED lamps. I'm pretty sure that these low wattage LEDs don't like the standard wound TXs and require electronic units. ...So what say you?? lol!!

He has around 20 of these recessed fittings to convert. So it could be a substantial savings for him, as his current lighting load of these fittings are running at around 4 KWh!!

Apart from my initial query, if these LED lamps do require one of these electronic units, are they available to drive 4 X LED lamps? What sort of price would these voltage/current based units cost in the UK, just as a comparison, as i'm pretty sure they are going to be much much cheaper here.
 
The light out was much better than i expected and not that much different, slightly narrower beam though like you expect with LED and the client liked the colour but i did use the proper driver which did the 4 lamps. Its just a shame about the fins clashing on his fittings but may work better on yours.
 
The light out was much better than i expected and not that much different, slightly narrower beam though like you expect with LED and the client liked the colour but i did use the proper driver which did the 4 lamps. Its just a shame about the fins clashing on his fittings but may work better on yours.

Ah, .... but yours were 11W, ...perhaps that's what the LED replacement needs, 11W's of LED power... lol!!
 
  • Like
Reactions: 1 person
Sorry eng 54 i mis read your post didnt think they were working i doubt they would be brighter ive always been disapointed with led lamps , well till i found the halers , having said that some of the 11 watt ones on ebay that i have bought were what id class a reasonable
 

Similar threads

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Thread Information

Title
Existing 12V : 50w Halo conversion to 12V : 7.5 LED lamps...
Prefix
N/A
Forum
Australia
Start date
Last reply date
Replies
22
Unsolved
--

Advert

Thread statistics

Created
Engineer54,
Last reply from
nickblake,
Replies
22
Views
4,223

Advert