D
daver
Just looking to you guys for a bit of help.
My surveyor friend who give me all my domestic work, asked me to survey a job for him. Went to have a look today preliminary with the intention to carry out a full report shortly.
There are 9 floors and 10 flats on each floor. 2 risers, one on each side of the building supplying 5 flats each side per floor.
Problem is that some of the fuses has disintegrated or are broken and the landlord now wants them changing as he has been told they cannot be replaced. It may also require that the cabling to each flat may need changing from the pyro shown, but will not know till we test.
On several, they have been replaced by 1361 fuses, but what they have done is gone into riser below and bolted 25mm tails, come out of riser through gland, through fuse and back in at connection point shown in pic.
Before I turn up next week to power down 45 flats, just to remove covers to investigate. Has anyone come across this before that could offer suggestions.
Or can we still get a fuse and carrier to suit.
Initially I am only reporting but then it will be tendered for.
Cheers
Dave
My surveyor friend who give me all my domestic work, asked me to survey a job for him. Went to have a look today preliminary with the intention to carry out a full report shortly.
There are 9 floors and 10 flats on each floor. 2 risers, one on each side of the building supplying 5 flats each side per floor.
Problem is that some of the fuses has disintegrated or are broken and the landlord now wants them changing as he has been told they cannot be replaced. It may also require that the cabling to each flat may need changing from the pyro shown, but will not know till we test.
On several, they have been replaced by 1361 fuses, but what they have done is gone into riser below and bolted 25mm tails, come out of riser through gland, through fuse and back in at connection point shown in pic.
Before I turn up next week to power down 45 flats, just to remove covers to investigate. Has anyone come across this before that could offer suggestions.
Or can we still get a fuse and carrier to suit.
Initially I am only reporting but then it will be tendered for.
Cheers
Dave