Garage electrics help needed please

[Specialist]

Why would you want to spur off of the RFC in the house and put a CU in the shed? bad practice, imo,

Hi Pete: come off the RFC , what am I missing ?.

 

[Pete999]

Hi Pete: come off the RFC , what am I missing ?.

I was assuming in advance that the OP may, I say may spur off the ring, wrong in this case, probably down to old age and one beer to many. Best to ignor my previous OP sorry.

 

[telectrix]

whaere in wales? one of us may be close to you.

 

[Jacko]

It's in the shed. Are the regs any different?

How would you install it if it was your job?

 

[Jacko]

In Swansea

 

[telectrix]

from a MCB in the CU (DB). SWA to shed. RCD garage CU with a 16A and a 6A MCB. if there are extraneous metal parts in shed, then that would complicate the issue as regards bonding if PME earthing applies.

 

[Jacko]

What size swa would be suitable? I'm guessing it depends on load?

In this case where we only have 1 double socket and 1 pendant?

 

[telectrix]

In Swansea

a couple of members down there. des56 is one.

 

[DPG]

Hi Jacko: Not trying to be picky, but is it a shed or garage? You've used both descriptions.
In domestic it's called a Consumer unit or CU not a DB.

To be fair it's still a DB though. Earthed/bonded tin hat on.

 

[Specialist]

I was assuming in advance that the OP may, I say may spur off the ring, wrong in this case, probably down to old age and one beer to many. Best to ignor my previous OP sorry.

No worries mate, thought I was losing it.
Mind you with some of the threads lately, it's enough to make us all lose it.
Save some beer for me & tel mate, think we need it