Help pricing 3 bed rewire please

[mr_deep_]

Hi All - Hope you all had a good Christmas!

I have just recently started my own business and struggle to price work as never had anything to do with that side of things in the past.

Job is to Rewire a 3 bed Detached house

Attic - New radial circuit with 2 sockets. 2 lighting points with 1 two way switch (to first floor landing) - (Attic fully boarded)

1st floor -
3 bedrooms each with 3 new chased twin sockets. Each with 1 lighting point and 1 switch. Main bedroom to have wardrobe lighting point with single switch (chased). 2 bedrooms to have Switched fused spur + install ring camera back entry to external wall.

Bathroom - 1 lighting point 1 switch, 1x 12v outlet (from lighting circuit) 1 extract via 3 pole isolator

Hallway - 1 new wall light with 1 way switch. Landing light with 2 way switch to ground floor. 1 twin socket (chased).

Mid staircase- New twin socket


Ground floor

Hallway - 1 twin socket chased. 4 spot lights. 2 way switching (hallway and living room).

Downstairs bathroom - 1 lighting point (1 switch). 1 extract via 3 pole isolator. 1x 12v shaver socket via lighting circuit.
Shower circuit via DP isolator.

Store room - 2 twin sockets (in stud wall). Lighting point (1 switch)

Living room - 7 twin sockets (chased). 2 lighting points (2 separate switches). Switched fused spur.

Garage - 3 sockets, 2 lights and 3 switch drops (intermediate switching) (sockets and switches in 20mm pvc conduit approx 12m to instal).
New fuse board + Test and certification. (Gas and water 10mm earth bonding already present).
No works in kitchen as is an extension and cable readings were satisfactory.

House completely empty - 1 man and 1 labourer to complete works

Any input feedback would be greatly appreciated ??

I do a drawing if that help

 

[telectrix]

try the price per point way. assuming plastic accessories. £60 per point (+ add cost of any accessries costing over a fiver). Then £300 - £500 CU cost depending on type of board.

e.g. 50 points £3000, adittional cost of fan.coojer point etc,say £250, DB £400... Total £3650.

 

[DefyG]

Just worked similar principle to post#2, no 'making good' plus VAT over £4k

 

[telectrix]

beer goggles typo.

Just worked similar principle to post#2, no 'making good' plus VAT over £4k

soth east prices generally 20% - 30% above those in the civilised north. and i didn't join VAT. no benefit.so same ballpark .


typo.should have bin cookerpoint.

 

[Dustydazzler]

My area you would be looking at £5000 ball park , that would be rcbo board and decent brand accessories etc
prices have gine up a lot in recent years , a 3 bed basic rewire 3 years ago would have been £3-3,5 , now £4-5ooo

 

[buzzlightyear]

Or cost how many days plus maritrials approx.

 

[mr_deep_]

try the price per point way. assuming plastic accessories. £60 per point (+ add cost of any accessries costing over a fiver). Then £300 - £500 CU cost depending on type of board.

e.g. 50 points £3000, adittional cost of fan.coojer point etc,say £250, DB £400... Total £3650.

Thanks mate - Is that for every switch and every socket we price it at £60 a point? For example bedroom has 3 sockets 1 light and 1 switch = £300?

 

[mr_deep_]

My area you would be looking at £5000 ball park , that would be rcbo board and decent brand accessories etc
prices have gine up a lot in recent years , a 3 bed basic rewire 3 years ago would have been £3-3,5 , now £4-5ooo

Where abouts is that mate? I'm in Birmingham myself

 

[Dustydazzler]

Where abouts is that mate? I'm in Birmingham myself

surrey

 

[mr_deep_]

Or cost how many days plus maritrials approx.

I estimated 7 days with a labourer so - Priced them £2100 - For labour only - Thoughts on this anyone?