Help wiring cooker hood for cafe

[HLR Electrical]

Hello I’m confused about the amount of wires for a cooker hood that need fitting into a speed control switch and then into fused spur. I’ll attach some photos but can you guys please help me on how to wire this?

Thanks

 

[Cid]

It should say on the instructions

 

[Charlie_]

Is there any gas appliances?

 

[Pete999]

It should say on the instructions

Agree RTFM

 

[HLR Electrical]

It should say on the instructions

Yes but obviously there is no instructions and that’s why I’m asking.

 

[Wilko]

Throw a few make and model numbers out and let's see .

 

[telectrix]

eliminating the gn/y as E, the you kave 3 Ls and a N. these 3 Ls will be 3 speeds. trial and error or bang.do you feel lucky punk? .

 

[DT1991]

Any photos of the controller itself?

 

[Pete999]

eliminating the gn/y as E, the you kave 3 Ls and a N. these 3 Ls will be 3 speeds. trial and error or bang.do you feel lucky punk? .

Well do you? go on make my day, this is a pair of Klein Linesman pliers, the most powerful pliers in the world.

 

[HLR Electrical]

The controller rotary switch is the same as this but goes from 0 - 3

 

[Charlie_]

The wires on your hand x 6
Where do they come from?
Is the fan 3 phase or single phase?

 

[Pete999]

Well do you? go on make my day, this is a pair of Klein Linesman pliers, the most powerful pliers in the world.

Don't know what happened obviously wrong thread sorry folks

 

[HLR Electrical]

The 6 wires are connected into the fan itself. The picture is the other end of it which is to go into the switch.
It is also single phase.

 

[buzzlightyear]

he controller rotary switch is the same as this but goes from 0 - 3

wrong speed control .Fan Speed Controller - STL - Fantronix Limited - http://www.fantronix.com/acatalog/STL_Electronic_Speed_Controller.html

 

[HLR Electrical]

wrong speed control .Fan Speed Controller - STL - Fantronix Limited - http://www.fantronix.com/acatalog/STL_Electronic_Speed_Controller.html

Here i have managed to find a picture of the whole fan package including the switch in a schneider box.

 

[DT1991]

The motor can you get a close up of that?

 

[HLR Electrical]

The motor can you get a close up of that?

This is all I have of the motor

 

[Lucien Nunes]

If the capacitor is integral to the motor, then the MI's for a similar model from the same series confirm that there are four lines for four speeds, plus N & E, but it doesn't say which colour is which speed. I would take a few resistance readings to confirm that the blue wire really is N, and test them, although you may well also be able to confirm which L is which speed as they will probably be in order of resistance to N.

If there is no capacitor on the motor itself, then it will need to be in the terminal box and the above does not apply as one lead will be for the capacitor winding.

Identifying the correct terminals on the switch is a matter of 2 mins with a continuity tester. If you find three separate N/O contacts, obviously connect one end of each of them to line and the other end to one of the speeds. Park the line for the unused speed.

 

[DT1991]

 

[Martin Kerr]