M
mmanzano88
hi guys, im having a problem wiring some relays that need to be activated by 2 different signals, i try putting a diode on one of the signal wires so electricity wont flow thru the other signal wire, but now im having a huge voltage drop, and the relay is not activating by the wire that has the diode in line, i can see my test light very dime compare to direct current.
im going to check to see how much voltage im getting exactly, any other ideas of how to wire a relay with 2 different signal without them interfering with each other, im trying to make a 93 computer engine, work on a 67 mustang ignition switch.
any help or will be very appreciated
im going to check to see how much voltage im getting exactly, any other ideas of how to wire a relay with 2 different signal without them interfering with each other, im trying to make a 93 computer engine, work on a 67 mustang ignition switch.
any help or will be very appreciated