NICEIC Certification Scheme niceic eic cert

[iceman]

hi i was just wondering on the niceic eic green cert where it say reference methord do i put in A B C D wot ever methord it says out of the big reg book or do i need to put in 101 etc for clipped direct to a joist above plaster board any help would be great cheers

 

[DHES-LTD]

I always use A B C method

 

[EddieB]

Same Here ABC etc

 

[iceman]

cheers guys i thought u did but wasnt sure just wanted to get it right as im takin the niceic by the short n curlys soon i'll let ya knw how i get on ;-)

 

[Spudnik]

As you have installed a circuit and we are now working to the 17th you should put 101 etc and not the A/C.

Tis what i do now anyway.

However, im not with the NIC and my certs dont even ask for this info.

 

[professional]

The "A B C" method is for your cert, the 101, 102 etc is for working out the current carrying capacity of your cable i.e. worst case along the entire length of the cable run.


Try not to confuse your assessor with these sort of questions - many aren`t as clever as you would suppose..........

 

[EddieB]

Jason
who

 

[flukey]

i use the computer based certs and there isnt enough space to enter 101 etc so ive stuck with abc etc

 

[professional]

i use the computer based certs and there isnt enough space to enter 101 etc so ive stuck with abc etc

Common sense confuses the pen-pushers every time.

 

[Spudnik]

Common sense confuses the pen-pushers every time.

Cheek

 

[flukey]

Common sense confuses the pen-pushers every time.

hahaha that didnt come across quite right did it
what i meant was the computer based certs only allow 1 character so its a bit of a no brainer

 

[iceman]

yeah but on the green niceic eic that iv gotta to use for me assesment is big enough for the 101 or 102 reference methord, witch is it thn i put in a b or c or 101 102 etc???

 

[flukey]

letters not numbers

 

[Guest123]

Looks like little old me is the odd one out then.

 

[Spudnik]

Have to say im not convinced about the letters thing as they dont appear to be listed anywhere in the new regs.

 

[Guest123]

I aint got me book to hand but I remember a few that I use - method 3 - clipped direct, method 6 - horizontal trunking run, method 7 - vertical trunking run. Also I do put 101 for T+E in insulation plus 6 or 7 if it runs in trunking.

 

[flukey]

Have to say im not convinced about the letters thing as they dont appear to be listed anywhere in the new regs.

apart from cable calc pages 274 to 316 and appendix 6 osg

 

[Spudnik]

apart from cable calc pages 274 to 316 and appendix 6 osg

So what about Table 4A2 Page 265?

 

[flukey]

So what about Table 4A2 Page 265?

know what your saying jason but i would still put a c
unless all of your circuit is run as per the numeric method but i find that highly unlikely with switch drops etc, most will be clipped direct

 

[Spudnik]

I suppose if we were going to be exact, and there was the room, we would put both!

Clear as mud as usual