Avid-DIYer
DIY
- Reaction score
- 0
I have a 4 gang Deta Smart Switch installed that has replaced a standard (old fashioned) 4 gang switch that is used to control 4 air conditioning zone dampers.
The Deta switch responds to the wireless app commands turning on / off as commanded or of course when touched manually, however the zone dampers are cycling closed then open again about every 10 to 12 seconds constantly.
Has anyone experienced this or have any suggestions?
The individual switches are staying in the closed position (i.e. power on) throughout.
Thanks in advance.
The Deta switch responds to the wireless app commands turning on / off as commanded or of course when touched manually, however the zone dampers are cycling closed then open again about every 10 to 12 seconds constantly.
Has anyone experienced this or have any suggestions?
The individual switches are staying in the closed position (i.e. power on) throughout.
Thanks in advance.