Pulling 16mm SWA through 150 M of conduit?

[GLENNSPARK]

Looks like we might have a (cable) pulling party? :smile5:

that sounds like p0rnography...

 

[chronyx]

that sounds like p0rnography...

Changed my mind

 

[1Justin]

Not wanting to disappoint anyone looking for sporting action, but I think I've made up my mind to advise a no-go without more digging. The gardener (who is the primary recipient of this cable in his shed at the end..) won't get his kettle, - or at least not very soon.

Thanks for the inputs.

 

[chronyx]

Can't you just cleat it along the bottom of a fence? This is important you never said there was tea involved

 

[Silly Sausage]

I've just checked out how far 150m actually is...that is one frigging big garden!
If they can afford to live in a place like that, they can afford to pay for a few holes to be dug, don't make life hard for yourself for these rich basterds.

I can imagine you having friction trouble dragging it round that bend.

 

[Beavstro]

Ah come on Justin! I think this is nearly at the stage where the forum members will pay for the work just to see the out come of this situation! Lol

 

[chronyx]

I can imagine you having friction trouble dragging it round that bend.

And we're back to Glennsparks ****ography I blame your avatar

 

[Engineer54]

If a couple of labours can get enough purchase on a bit of rope to stretch that piece of armoured I will eat my hat !!! I am not talking about yanking the hell out of it , and assume a modicum of sense is being applied to the pull and the cable is correctly secured , having said that .

Going by that sort of statement, i dread to think of the state of some of the cables that have been pulled through small long ducts in the UK!! Going round even slow bends in a long ducted system and you'll be having to yank that cable when dead pulling, especially in a small 50 mm corrugated duct over 150 metres. ...But hey, what the hell do i know, ..Right??

 

[7029 dave]

That is some pull with a small duct, good luck!!Bet you will be digging down on it.

 

[iamelectric]

i dont get y some people think a 50mm duct is to small for a 16mm swa , a 16mm swa is roughly 30-32mm in diameter!!!