Steel Conduit Bending Writen guide.

[Bender]

Looking for writen guide to bending Conduit.
All conduit bending guidance seems to be done through word of mouth.
Looking for a writen guide even if ancient
There must be something writen down with guidelines, angles etc. There seem to be US guides but nothing for the UK.
Thanks.

 

[telectrix]

loads about.
Benfield Conduit Bending Manual 9780872885103 Paperback P H for sale online | eBay - Benfield Conduit Bending Manual 9780872885103 Paperback P H for sale online | eBay - https://www.ebay.co.uk/p/Benfield-Conduit-Bending-Manual-9780872885103-Paperback-P-H/1705689117?iid=392253278736&chn=

and
Ugly's Conduit Bending, 2017 Edition - https://blackwells.co.uk/bookshop/product/9781284119442?gC=5a105e8b&gclid=CjwKCAjw4LfkBRBDEiwAc2DSlP4VDDhVg5IOIIo5R17tdHuY7EQWBEGv_OMbUxHUuKM9jQ4KUPmIsBoCNhIQAvD_BwE

 

[Deleted member 72666]

Loads of info here: (More than you could shake a conduit at!)
how to bend conduit - Google Search - https://www.google.co.uk/search?q=how+to+bend+conduit&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-USfficial&client=firefox-a&channel=fflb&gfe_rd=cr&ei=KlMDVMOIFOHH8gfDwoKoAg

 

[Bender]

Unfortunately both books and most of the google search are based on the US method of bending Conduit and seems to be quite different

 

[Dustydazzler]

In my limited experience with steel conduit there is no substitute for practice

 

[Anthony S]

I've got training books on conduit, tray and plenty of other stuff from the 80's when I was an apprentice under CITB / JIB
But the books go hand in hand working on site with a skilled Electrician showing you the way to bend and form conduit.

 

[H]

I've got training books on conduit, tray and plenty of other stuff from the 80's when I was an apprentice under CITB / JIB
But the books go hand in hand working on site with a skilled Electrician showing you the way to bend and form conduit.

I used to have this too, had it handed down to me from a particularly facetious old boy. Can this publication still be sourced?

 

[Bender]

I've got training books on conduit, tray and plenty of other stuff from the 80's when I was an apprentice under CITB / JIB
But the books go hand in hand working on site with a skilled Electrician showing you the way to bend and form conduit.

I used to have this too, had it handed down to me from a particularly facetious old boy. Can this publication still be sourced?

Something like this sounds good, any idea the name of the training books?

Sorry think I pressed some wrong quote buttons etc, I'm new

 

[Loki]

I found this:

 

[Squid]

Damn, brings back memories would love to have a go at bending conduit.

 

[Bender]

@Loki some interesting stuff

hoping for something bit more like the US guides but for UK

Seems a bit crazy that theres no writen guides only word of mouth.

 

[Tes369]

That's because it's a secret

 

[Squid]

Nostalgia has kicked in I have been looking at benders on the internet.

 

[Tes369]

Nostalgia has kicked in I have been looking at benders on the internet.

You might want to keep that to yourself mate.. this is a public forum after all.

Cheers

 

[H]

Nostalgia has kicked in I have been looking at benders on the internet.

Grinder?

 

[Sintra]

Have a look at this.

 

[Squid]

Grinder?

I always used a hacksaw.......

 

[H]

I always used a hacksaw.......

Medieval

 

[Bender]

Have a look at this.

Thankyou sir Not fully read it all but looking good.

There is some of this in the current City and Guilds Smart Screen but nothing on actualy forming the bends so thanks again

 

[Bender]

Thankyou sir Not fully read it all but looking good.

And after printing and further look some really great stuff and anything else like this would be appreciated