mikeshaw123
DIY
- Reaction score
- 0
we have a conventional heating system and underfloor heating recently installed by the builders plumber - it’s all wired up (pump, valve, thermostat receiver etc..) but both the electrician and builder seem to be at odds with the connection at the boiler.
currently the boiler just has LNE and everything else is in the wiring box upstairs.
sparky has run a 5 core cable next to boiler and not been back to make final connections yet - currently sat in wago’s.
i’m after advice - should this cable be in the wiring centre or connected direct to the boiler. we have a stat for the ‘normal’ heating which is running fine, but i’m doing lots of reading and cant figue out how to wire this second stat - nor am i having any joy in getting it done by those ‘in the know’
any help appreciated. we have a baxi boiler with this connector block (see pic)
lne and l2 is whats scribbled on the cable in sharpie!
currently the boiler just has LNE and everything else is in the wiring box upstairs.
sparky has run a 5 core cable next to boiler and not been back to make final connections yet - currently sat in wago’s.
i’m after advice - should this cable be in the wiring centre or connected direct to the boiler. we have a stat for the ‘normal’ heating which is running fine, but i’m doing lots of reading and cant figue out how to wire this second stat - nor am i having any joy in getting it done by those ‘in the know’
any help appreciated. we have a baxi boiler with this connector block (see pic)
lne and l2 is whats scribbled on the cable in sharpie!