Discuss Wanting career change - advice needed! in the Industrial Electrician Talk area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Have just read through this thread and the first thing I will say is that it's a brave decision to make a career change away from teaching.

If you are serious about being an electrician then realistically the advice given about courses at the beginning of the thread is a good starting point. With regard to 2391, don't worry about it until you have got 2330 or equivalent as test and inspection is part covered in this course.

Try chatting with a couple of local eletricians an see if there is anyone wanting a mate. This will get you your practical experience while you do your courses.

I don't know enough about short courses to make a valid comment on them. The only thing that I can say is that it concerns me that firms offer a short course to teach what it took me several years at college to learn (this is just a personal opinion and I am prepared to hear from those who know more about these courses than I do)

You no doubt have contacts in local colleges, have a chat with them. Be prepared to start on a relatively low wage but at the end of the day what you are prepared to put in you should get out.

If you decide to go with the career change, I wish you all the very best and I agree with an earlier comment, go for it. Whatever you decide post it on the forum and if you do join this insane industry if you have any questions then hopefully someone here can help.

Good luck, whatever you decide.

thanks mate thats really helpful advise its a big step walking away from sumthin so sucure i know...

sumtimes i think you have to take that leap of faith... and aim to land on your feet ;)
will keep you posted cheers all (any other insight is more than welcome cheers all)

Hi Craig

In answer to your questions;

1,3 and 4) academic qualifications required would be minimal maths, maybe physics. The standard electrical qualifications C&G electrical installation, the testing and inspection and 17th edition. It is probably possible to pass these within 2 to 3 years but the actual qualifications stand for very little in the terms of practical knowledge. The best way to learn is by working within the industry for a period of time with more experienced sparks. There are so many "tricks of the trade" that aren't covered in a class room. For this reason i think that evening courses or day release would be more suitable as short intensive courses will be more difficult to take in if not working within the field

2) Average starting salary can be anything from 14k to 18k. I don't think that a company would pay more for someone straight out of college with limited experience. Obviously as you become more proficient the money should begin to increase but unless you are running your own business or putting in some serious overtime i think that 28-34K is a realistic figure for a 9-5.

5) your demand will depend on the qualtiy of your work. Most of my work comes from recommendations or the previous merits of the work we've carried out. Yellow page ads and such like provide mainly annoying additional sockets etc too much hassle for small return.

6) The question about setting up is perhaps a little pre-emptive. I think that with little experience you will struggle to set up alone as without the knowledge of several years within this trade there are too many learning curves where you could get unstuck. Of course a smart guy would set up, employ someone who knows what their doing and skim of their wage and knowledge. Running a business is a completely different ball game to being an everyday sparks - NIC or governing body enrolment and inspections, insurances, vehicles, wages, people not paying, VAT, H&Safety, correct estimating, invoicing....the list goes on.. and this is not including the everyday struggle of actually doing the work.
7) Charging for work will be dependant on what the other people are charging in the area. Most domestic installations the owners will have called in maybe 3 different people. You can find out by just phoning around competitors with a few carefully placed questions.

Hope this is of some help. I have recently taken on a guy aged 32 who decided to change his career. He has found it a challenge but enjoyable from previous work. It is not something that happens overnight. Hope this is of help and good luck!

wow, thank you for your time ! that was really insightful/informative, Q - the guy you have just employed how did he train/retrain? over what period? etc do you think its a realistic approach to do an intensive course then get employed by someone like yourself to learn the 'trix of the trade'? so i start the job at least 'qualified in thoery' ? i fully appreciate that theres no better way of learning the ropes than on the job but these courses give you the certificates required by law to carry out the work... i wouldnt just be able to scout for work with a sparky with no prior knowledge would i?
 
Last edited by a moderator:
Hi mate , from what you have said , it seems you want to be self employed, the quickest route is to , sign up for a NIC part p course (1 week) Hybrid Technical Services - Gas and Electrical Training
then do your 17th edition - 1 week plus lots of studying due to your lack of experience plus a multiple choice exam

You are now ready to join the NICEIC under part p domestic installer scheme once you pass your on site assessment, get a set of tests , insurance , etc ...this is all you need to work in domestic properties... which seems mad but ........

ideally you should have a few years on site experience , but its not a requirement as a friend of mine has just proved , as he is now a NICEIC part p electrician ..... six months ago he was a kitchen and bedroom fitter
 
Last edited by a moderator:
1. What academic qualifications do I need?
None, as long as you are able to read and write to GCSE standard

2. What is the average starting wage/potential earning power?
Personally, I was on £10ph with no prior experience and no quals. Employed as an electricians mate/labourer

3. Which qualifications do I need? (Electrical)
Either City&Guilds 2330 (to become 'full' electrician, domestic/commercial/industrial) or EAL Domestic Installer Sheme. Let's leave it at that for now ;)

4. Is it better to do a long course, or an intensive short course?
If you've no prior experience, long course. College 2 nights a week or 1 day a week for 3yrs.

5. Is there demand for work...? Will I be earning as soon as I qualify?
Yes and yes.

6. Is it difficult to be set up as self employed, and to be successful?
Can't really comment on this one.

7. How do I find out what to charge for a particular job?
Experience and electriciansforums.net (there really is a wealth of knowledge on here and some really good guys)

Hope this has hekped some? Keep us posted on your progress and any further Q's...

You know where to come.
 
Last edited by a moderator:
1. What academic qualifications do I need?
None, as long as you are able to read and write to GCSE standard

2. What is the average starting wage/potential earning power?
Personally, I was on £10ph with no prior experience and no quals. Employed as an electricians mate/labourer

3. Which qualifications do I need? (Electrical)
Either City&Guilds 2330 (to become 'full' electrician, domestic/commercial/industrial) or EAL Domestic Installer Sheme. Let's leave it at that for now ;)

4. Is it better to do a long course, or an intensive short course?
If you've no prior experience, long course. College 2 nights a week or 1 day a week for 3yrs.

5. Is there demand for work...? Will I be earning as soon as I qualify?
Yes and yes.

6. Is it difficult to be set up as self employed, and to be successful?
Can't really comment on this one.

7. How do I find out what to charge for a particular job?
Experience and electriciansforums.net (there really is a wealth of knowledge on here and some really good guys)

Hope this has hekped some? Keep us posted on your progress and any further Q's...

You know where to come.

thank you very much for your time thats was very helpful :)
 
hillcbt,
i first read this post when just opened
its grown very quickly and most of the posts are valid read them all if you're looking at a career change
good luck keep us posted
 
Hi Hillcbt
I have recently career changed. In Military logistics for 30 years then went down the 2381, 2391, EAL domestic installer route. Its mind numbing at times, but very interesting. Set up on my own, but not registered yet with NIC/Napit/Elecsa. Panicing a bit about my abilty to pass assessment although academically all there. I'm earning money, and have been for six months, but I do have the added advantage of a military pension. I couldn't survive solely on what I earn as an electrician (yet). Hope it all works out for you. Its an interesting challenge.
 
you need to speak to shakey. he will give you all the info you need. like some have said pros and cons for quick courses at the end of the day it all depends on what you want to.
 
you need to speak to shakey. he will give you all the info you need. like some have said pros and cons for quick courses at the end of the day it all depends on what you want to.

hi i was told today that the 'quick courses' dont fulfil the nvq requirements for 2 & 3 as you need to have work experiance/certain amount hours on the job. sparkies mate. not just theory

does anyone know if this is the case, or how this works. a lot of people cant believe you can do a 4/5/6 week course then set up and work as an electrician in this time. and it makes sense i wouldnt be confident goin into someones house after this short, theory based space of time and only having limited knowledge of practical through workshops.

and im confident that the people who thought these courses up have realised that lives could be at risk literally, lettin a 'rooky' loose
i mean you do your theory in a driving test you still have to sit the practical to pass....


Q= are you allowed to carry out self employed work without site work experiance
Q= would you be employable without on site work experiance
Q= are you able to complete course and gain nvq status without work experiance

thanks to everyone who has contributed to this thred

Hi mate , from what you have said , it seems you want to be self employed, the quickest route is to , sign up for a NIC part p course (1 week) Hybrid Technical Services - Gas and Electrical Training
then do your 17th edition - 1 week plus lots of studying due to your lack of experience plus a multiple choice exam

You are now ready to join the NICEIC under part p domestic installer scheme once you pass your on site assessment, get a set of tests , insurance , etc ...this is all you need to work in domestic properties... which seems mad but ........

ideally you should have a few years on site experience , but its not a requirement as a friend of mine has just proved , as he is now a NICEIC part p electrician ..... six months ago he was a kitchen and bedroom fitter

hi cheers,
hi yes the course ive looked at offer 'every thing id need to set up on my own in just 4 weeks' everything you mentioned above

however

what is involved in the on site assessment? (how du get on site in order to be assessed???? if your not qulifiyed how can you get work???)

and also what is ment by 'get a set of tests'

sorry if these questions seem obvious...
 
Last edited by a moderator:
what is involved in the on site assessment? (how du get on site in order to be assessed???? if your not qulifiyed how can you get work???)

right, on site assesment just means on the job you've done, it coule be anywhere (not on a building site as such), theres a big difference between qualified and competent, if you can do the work then you'll be ok, are you looking at going defined or full scope? if you go for full scope where you can carry out all domestic work then you could change your consumer unit at home and do an extra socket or something in a neighbours house. you will have to make sure that all your work compies with current regs and that the rest of your house is also up to standard, main equipotential bonding etc.

the above could get you your jobs for the assesment, but bear in mind you will need local authorty building control to complete the consumer unit change. then its s case of paying for your assesment and waiting for them to tell you when they will come and see them. theres some threads on this site somewhere that will tell you what to expect on the assesment, but basically will need to know a far amount on inspection and testing and values expected etc aswell as knowledge on building regs, plus 2 million public liability, approved document p, memorandum of electricity at work regulations 1989 etc etc etc, which ever body you go with will tell you what you need.
 
Hi mate , you will need a multi function tester > 404 page not found: Metrel d.d./eurotest_family_multifunction_testers/

as for the on site assessment , this can be a fuse board change in your own home with the NIC


The Testing may take you a bit of time to pick up , my advice is to get your test kit, a testing guide/book/dvd , then make your own rig to work and practice testing on > get your self a sheet of ply and fix a fuse board , small ring main (4 skts) lighting circuit , cooker circuit ect then wire it all up , use a flex and plug to power the rig .


Here is what you need on top of your 17th edition and part p quals


  • Public liability insurance cover
  • Electrical reference documents (BS7671, Electricity at Work, On site guide etc)
  • Test instruments and calibration records
  • Electrical installation certificates for work carried out
  • Complaints procedure and log
  • Guarantee Insurance provider (not required on the day of the assessment as details can be provided at a later date)
  • Risk Assessment procedure
  • Health & Safety requirements
  • Site Visit
its far from easy to become a spark in such a short space of time, it took me 5 years serving my time and i,m only just getting to grips with testing nearly 10 years on :eek: but am sure you will get there if you really put the effort in

Cheers

Ste:)
 
Last edited by a moderator:
That was a great post Jonboy; comprehensive, encouraging but realistic. Thank you for your time spent answering long lists of questions from young hopefuls like myself.
 

Reply to Wanting career change - advice needed! in the Industrial Electrician Talk area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock