Nissan nv200 | Page 2 | on ElectriciansForums

Discuss Nissan nv200 in the Business Related area at ElectriciansForums.net

Got a 61 plate had it from brand new can't wait to get rid hate the thing it is the worst van I have had, I've driven transits traffics connects and astras and I can say That if ur around my height of 6ft 2 the ache in your knees wil get unbearable after A while! Just my opinion tho :)
 
Hi We have two NV200 with euro5 engine se they have been very good van and getting 55mpg when we change the fiat doblo and vw caddy will be getting two more they do over 1000miles a week in each no break downs hope this helps.
 
I got a new shape 58 plate Peugeot expert "professional" (just like me, hahaha), best van I've had so far (touch wood) goes like stink gets loads in, only prob I've had is the EGR valve keeps playing up but I've had it replaced now
 
I have an NV200, and I wouldn't swap it for anything, especially something made by Ford. Not to mention the payload is bigger than the LWB high top Connect. And it was a pre-reg so it was an absolute bargain! Bluetooth, parking sensor, steel bulkhead all standard equipment.

And if the wife's not in it I can get it to 60mpg.
 
but not 60mph! my old smoke box has the best engine management system in the world - my right foot. none of these chinese electronics to go wong. parts are dirt cheap from scrappy. bloody noisy beast though with that 2.3d between the seats.
 
I have an NV200 from new, and ocassionally (once every 2 months, maybe) it would refuse to start (starter cranked forever but engine wouldn't fire). After a couple of trips to the garage and replacing fuel parts and other stuff they decided it was an engine management computer issue so needed a software upgrade. After doing that (another day in the garage) it seems to be fixed.

The carpet seems to wear very quickly, with a hole appearing within a thousand miles or so, this picture being at 3500 miles. Also there is a silly hollow in the door sill where all the gravel and dust collects with no natural way out, which is a bit of a design flaw for a commercial vehicle. Oh, and there's a bit of plastic by the seat which the seatbelt catches on which is annoying!

[ElectriciansForums.net] Nissan nv200


[ElectriciansForums.net] Nissan nv200
 
I have an NV200 from new, and ocassionally (once every 2 months, maybe) it would refuse to start (starter cranked forever but engine wouldn't fire). After a couple of trips to the garage and replacing fuel parts and other stuff they decided it was an engine management computer issue so needed a software upgrade. After doing that (another day in the garage) it seems to be fixed.

The carpet seems to wear very quickly, with a hole appearing within a thousand miles or so, this picture being at 3500 miles. Also there is a silly hollow in the door sill where all the gravel and dust collects with no natural way out, which is a bit of a design flaw for a commercial vehicle. Oh, and there's a bit of plastic by the seat which the seatbelt catches on which is annoying!

[ElectriciansForums.net] Nissan nv200


[ElectriciansForums.net] Nissan nv200
Here, let me help with that New Genuine Nissan NV200 Carpet Mats (set of 2) | eBay :D
 
As an eBay Associate we earn from qualifying purchases.
that's the problem with all modern vehicles. engine management systems that shut down if you fart. just an excuse for the main dealers to rake in oodles of cash.
 
that's the problem with all modern vehicles. engine management systems that shut down if you fart. just an excuse for the main dealers to rake in oodles of cash.
Yeah just like that stupid problem i had with mine recently after i left the battery disconnected overnight, that must have been ecu related because it fixed itself and has been fine since!
 

Reply to Nissan nv200 in the Business Related area at ElectriciansForums.net

Similar threads

I know it was a few years ago when LED was mor in its infancy but we looked at a job that had designer flo light fittings in a big bar. The...
Replies
3
Views
350

Recommended Sponsor News

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top