Hi,
I would appreciate some views on the following issue I have.
The Cooker radial in a house has been wired in 2.5mm T&E, to save the expense of a larger cable. Without boring with the detail, I cannot pull out and replace the existing cable, nor wire in a new 32A circuit using another...
Greetings
After having made some floorboards in the bedroom secure after the cowboys who did the electrics in this house a long time ago couldn’t be bothered, I have duscovered that the sawn-off end of the floorboard had been hammered back under the wall, and as a result, the outer insulation...
Hello Forum,
I need to replace the hob in the kitchen as it is faulty.
I would like to be able to use an induction hob, so I need to make sure that the wiring and mcb on the cooker circuit is the right specification.
The combination Oven (1 small / 1 Large ) has a Max load of 4.1Kw.
The...
Hi All,
We are in the process of replacing our gas hob to an induction hob (7.35 KW, 32 Amp). Our electrician suggested that we get a radical circuit terminated at a 32 amp RCBO. There are currently double pole switches for exhaust and washing machine hanging from another ring main. Our idea is...
Hi, I would like to move my built-under oven to the opposite side of the kitchen into an eye-level housing requiring 15M of 6mm T&E cable surface mounted round the kitchen behind the units. To keep it simple I intend leaving the existing switch connected to the existing cooker connection point...
Hello
I’ve pulled out a electric oven and the connection plate at the back for the cooker circuit has 2.5mm hardwired to the 6mm circuit for a 1.76kw load and also a 6mm connecting a induction hob,unknown load.
Does the 2.5mm need to be fused down or is it okay being spurred off the cooker...
Hi, total novice here but I really need help with this. Any input would be much appreciated. We recently moved house and the cooker in said house is ancient and costing us a fortune, so has to be changed so the existing cooker is wired to a double or single poled switch? I think? See picture...
Hello, My cooker (LOGIK LFTC60W16 oven with grill and 4 hobs had it maybe just over 2 years) stopped working about 2 weeks ago. I found out we have no cooker switch on the kitchen wall so checked the Circuit Breaker box. Everything was on. With no other option I left the cooker MCB switch in the...
Hello all, first post by a new member so apologies for any posting faux pas in advance. (Hopefully this is the correct place to ask this rather long question)
I’m in the process of re fitting my kitchen and was planning on making a couple of minor changes to the wiring installation. All of the...
Hello I’m confused about the amount of wires for a cooker hood that need fitting into a speed control switch and then into fused spur. I’ll attach some photos but can you guys please help me on how to wire this?
Thanks
Hi
I've removed a 3-phase commercial cooker from my kitchen (combined oven/hotplates/grill). The supply is via a 3 phase mcb (no RCD)
The replacements are a domestic induction hob and an integrated oven/grill.
The hob has 2 line terminals which can be linked for single phase or wired to 2...
Evening All another odd question (I love my customers)
There’s no 10mm or 6mm cable in their kitchen, apparently when it was wired there were all 13amp eco appliances. Anyway a new couple have bought it and want a 5 ring hob installed but the kitchen is done to a high standard so they don’t...
Good morning,
Hope this is in the correct place and would really appreciate some advice.
I had the house fully rewired in October 2017.
No problems since.
The electric switch for the cooker started making violent crackling sounds yesterday and the cooker is now unresponsive and I obviously...
Hi all,
When wiring a kitchen and the customer is buying a separate cooker and hob, which combined has too high a load for a single 6mm,
Do you wire two separate circuits with a 6mm for each or one larger cable and have both on same circuit?
I'm a gas engineer working for a well known retailer. Spend all day Installing cooking/laundry. Electrical training is pretty poor on their part. Here to educate myself in best practice/regs. Pretty sure much of what they ask us to do electrics wise is beyond our competency.
Hello all. recently bought a secondhand dual fuel cooker. Range Master Leisure.. Serial No. 5407003589. When it was first put in it worked fine. Then the following day, when the fan oven was switched on it would trip out. Got in touch with guy we bought cooker from and he said he never had...
Model 444440196 I think, Gas and electric. It fails when I turn the lower oven on in any capacity except just fan (fan without heating in any way). It has a fan and grill element and they both trip it. It has an option for just fan alone without heating and that doesn't trip it (least I think...
So I fitted a new metal faceplate switch on the wall socket for my cooker. All went well. As I'm also tiling I took it off a few days later, and noted some of the live wire insulation rubbed off presumably by me screwing the screws in when assembling. I have read of this before, first time hrs...
Hi, neighbour has asked if I would run new cable from existing cooker control unit to new oven/grill. The easiest way to run cable without disruption would be under existing kitchen cupboards. Cable would be 2.5mm or 4mm depending on oven. Is it ok to run this,this way ? and would it be better...
Hi,
What would be the Maximum disconnection time for a 40Amp domestic Cooker circuit in a TNCS system be, where it has a 13A socket outlet on the panel/isolator faceplate?
Obviously a final circuit >32A would be 5 secs but I was just interested as to whether the presence of a 13A socket outlet...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.