fused

  1. L

    a Fused Digital Timer Spur switch

    Hi all, (Just reposting, there was some confusion, I was mistaken for a domestic electrician, I'd like to think I have basic understanding, but I'll stick to carpentry!) There were some great replied on the original thread, but I thought id post again, with the info I posted, you never know...
  2. L

    Fused Digital Timer Spur Switch

    Hi all, Would somebody draw a diagram of how they believe a Fused Digital Timer Spur switch should be installed. A bit of information; There are 6 floor standing outdoor LEDs. 1.5mm SWA feeding each and routed back to the consumer unit. Shall be protected by a 6amp Wylex RCBO. Thanks in...
  3. D

    Seeking advice re oven change - double socket to fused spur

    Hi, I'm looking to replace my electric single fan oven. It is plugged into a double socket, the other socket having the gas hob plugged into it, and this double socket is wired to a 13a switched fused spur. Looking at the ovens in my price range I can see some that include a plug and can be...
  4. W

    Fused Spur For LED TV

    Hi, Hoping to get a 2nd opinion please. We are fitting out a new room and will be wall mounting the TV. We want all connections to be hidden behind the TV. The problem is that a standard mains socket and plug is too deep behind the TV so TV sticks out too far. Currently, in another room...
  5. A

    Electrician Jobs Can i connect 2 sockets to a fused socket and this inturn to a other fused socket

    There is a double socket on the wall where the main feed comes in and this is then connected to a none switch fused socket. Iv'e been told i can add a other fused switched socket and connect both together then run 2 additional sockets off the fused switch one?
  6. D

    Single Pole Fused Spur From Ring Main

    I have two cables for wall lamps (1mm T+E) going to one of the socket in the back of the TV. These lamps will be controlled with smart bulbs with a little remote control or/and an app on the phone, no need of wall switch. I'm considering to use the 47mm double metal box to host a modular single...
  7. M

    RCD on radial for fused spurs?

    Hi all, Half way through an installation as a subby on someone else’s electrical contract. It’s for a church, in which they’ve asked me to run 2 radial circuits. Circuits 1 and 2 split a total of 10 fused spurs, 5 on each radial, each with a 3a fuse and on a 20a mcb. Cables are run under...
  8. S

    Am I qualified for fused spur

    Hi all, I’ve got a friend who’s a fully qualified electrician, and today we got into a discussion, I install intruder alarms, I have completed my level 2 electrical science and installation, and 6 months ago completed the more relevant course of “mains compliance” qualification, mainly so I...
  9. B

    Fused connection unit

    2 Questions, 1. 2.5mm T+E on radial, 20A breaker feeding 1 FCU that feeds water heater, can I come off this FCU with another FCU to feed a heater? 2. 2.5mm ring main, consisting off FCU and sockets all on ring, can I come off one of these FCU to feed a FCU spur?
  10. 1

    How many sockets off a fused spur

    really simple one how many sockets can I run off a 13amp fused spur, I know I could look it up in the book, but I'm trying to win an argument in a pub?
  11. B

    neutral in Live Load on Fused Spur

    has anyone any experience of this. The boiler is 14 years old and has only just gone wrong. when the boiler engineer looked at it he found there was 240v between the neutral and earth inside the boiler unit.
  12. E

    Broken 13A Switch Fused Isolator?

    Whilst checking for a tripping RCD I found that a 13A Switch Fused Isolator, for a double socket behind a washing machine and a dryer, was giving various voltage readings when in off position, 240v when on and stayed at 240v when switched off. This video shows the problem...
  13. D

    Combo plug socket + fused spur box sought

    I recently came across some legacy lights which were taken off an un-fused spur which is part of a dual plug socket box. I have been unable to find a combination dual box that has one plug socket + one fused spur connection which seems the easiest way of fixing this non-compliance. I would be...
  14. Adam_92

    Alarm and heating fused spurs

    In a fire alarm circuit with a unswitch fused spur would you put a 3A fuse? In a heating system with a switched fuse spur would you put a 5A?
  15. O

    Fixed installation back to a plug or fused spur

    I have been asked to fit a set of electric gates and some garden lighting to a property. I'm working behind the guy doing the indoor electrics. He is talking about me wiring the gates back to a plug and the garden lighting to a fused spur. Question is do I issue a minor works certificate for...
  16. D

    Install one gang Sonoff to fused socket

    Hello I have a few of these installed around the house and work absolutely brilliantly. Just wondering if below is feasible and how I would achieve it. I have a fused switch that controls the outside lights wired as per below: I would like to replace with a one gang Sonoff switch: Is...
  17. J

    Non electrician: advice about socket connected to a fused switch

    Hi all I have a single socket behind my fridge freezer that is inaccessible and so has a fused switch connected to it for easy access to turn on and off. I have been using a 2 gang adapter on this socket so that I can run my chest freezer of it as well. Would it be possible to change the...
  18. P

    Non-Electrician: Switch Fused Connection Unit Light Not Working

    The neon light on my flat-plate/switched fused connection unit doesn't come on when I use the washing machine. The machine still works - but does the fact that the light doesn't come on mean something is wrong? Do I need to get an electrician in?
  19. D

    Two fused spurs from one current socket?

    Hi, I'm doing some work on a room I want to convert into an office space. It currently has three sockets in it. One has two neutral and two live wires connected to the socket, the other two have 3 live an neutral wires (this wiring is done circa mid 60's we think. I plan to add about 2000kw...
  20. I

    Honeywell 2 amp fused connection unit

    Just a quick questiin can i use a 3 amp for a 2A fused connection unit the factory manuel is saying 2 amp full stop is this 100% or can i use a 3 amp i would of thought this would be sufficiant and then wired to a 6 amp breaker? Never done a alarm system before so making sure as dont want to pop...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electric Underfloor Heating Electrician Courses Heating 2 Go Electrician Workwear Supplier
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

Daily, weekly or monthly email

Advert