Discuss 100amp Isolator switch required in the Electrical Forum area at ElectriciansForums.net

Welcome to ElectriciansForums.net - The American Electrical Advice Forum
Head straight to the main forums to chat by click here:   American Electrical Advice Forum

Hello everyone. I'm hoping you can advise. I am in need of a 100amp fused isolator switch with a tiny footprint. Any recommendations please? Thanks
Have a look at the various items in the relevant electrical catalogues.
 
wylex or click do a KMF but only to 80A.
 
or even double pole
 
Or even 5 poles dancing
100amp Isolator switch required {filename} | ElectriciansForums.net
swd in the middle.LOL.
 
Thanks for all the replies. I have relocated my CU. It was originally next to the mains meter and is now much further. I believe I will need the isolator switch next to the meter now. I didn't realise I would need this as the whole point of moving it was so that it was less noticeable. But now I've been told I will need the switch next to the meter so I'm trying to get it as small as possible. Thanks
 
Thanks for all the replies. I have relocated my CU. It was originally next to the mains meter and is now much further. I believe I will need the isolator switch next to the meter now. I didn't realise I would need this as the whole point of moving it was so that it was less noticeable. But now I've been told I will need the switch next to the meter so I'm trying to get it as small as possible. Thanks
Assuming you are using swa you won't get much smaller than this. Lewden is generally a poor quality option but it is what it is.
Lewden 100AMP SP&N SINGLE POLE AND NEUTRAL FUSED ISOLATOR SWITCH - https://www.superlecdirect.com/p-fs6380100-lewden-100amp-spandn-single-pole-and-neutral-fused-isolator-switch?gclid=CjwKCAjwtYXmBRAOEiwAYsyl3PyBWmBRg3gV7K5M4dUBPWPgWVF1weX3cCHt2BslHNr4M8uADjQCbBoCFAMQAvD_BwE
 
Thanks for all the replies. I have relocated my CU. It was originally next to the mains meter and is now much further. I believe I will need the isolator switch next to the meter now. I didn't realise I would need this as the whole point of moving it was so that it was less noticeable. But now I've been told I will need the switch next to the meter so I'm trying to get it as small as possible. Thanks


How on earth did you carry out the cable calculations for the submain without an OCPD rating for the circuit?
 
Thanks for replying. I am not an electrician. I am acting on advice given to me by a friend (who is a sparky) and the electric wholesaler I have been purchasing materials from. So sorry but I have no idea about your question davesparks.
 

Reply to 100amp Isolator switch required in the Electrical Forum area at ElectriciansForums.net

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock