chamberinho
DIY
- Reaction score
- 2
Hi electricians,
I have bought a metallic 3 x spotlight to replace a standard rose pendant. The light is on the landing which can be operated by two switches. I've attached some photos below.
I'd like some advice on how to wire this up. My plan is to:
Please let me know if I"m on the right path!
Thanks,
Ollie.
I have bought a metallic 3 x spotlight to replace a standard rose pendant. The light is on the landing which can be operated by two switches. I've attached some photos below.
I'd like some advice on how to wire this up. My plan is to:
- Connect the 3 neutral wires in the connector box provided
- Connect the 2 wires for the switch in the connector box provided
- Connect the 3 earth wires from the ceiling + the earth from the new light (which appears to be an extension of the luminere itself) in the connector box provided
- Use a wago connector to connect the 2 live wires coming from the ceiling (should there be a 3rd?)
- Cover the exposed earth wires from the ceiling in yellow/green insulation tape
Please let me know if I"m on the right path!
Thanks,
Ollie.