Discuss Ceiling recessed down lighters in the UK Electrical Forum area at ElectriciansForums.net

Consideration of building regulations would be a transmission of sound, fire and air through the hole.

not to mention if fitted in a bog room, the transmission of fart gases.
 
My list not to.

Expensive to run.

Run very hot.

Damage plasterboard, heat.

Heat can damage springs so they start to drop down.

Heat can damage joists.

Rare cases shatter.

Forever changing lamps. Good luck with that if the heat has deformed the fitting and or made the plasterboard so delicate it falls apart.

Can be a fire hazard.

Heat can melt connections and wiring.

In case I forgot they generate a lot of heat.

Wasteful horrible things that are more bother than they are worth for 99.9% of installations.
 
Wow , you def don't like them do you , there must be millions in homes around the uk ! .
I have them in the Kitchen ( not fitted by me ) for over 4 years not replaced a bulb as yet , they are not recessed in the ceiling though ! .
 
Part of the electrical qualification now, and advice in general is to be as eco friendly and “green” as possible.
Therefore, it’s quite common for us to advise on LED lamps purely on their power saving merits.
 

Reply to Ceiling recessed down lighters in the UK Electrical Forum area at ElectriciansForums.net

Similar Threads

Hi, want to installed some LED strips in the ceiling and wanted to know how the recessed LED profile is fixed in place and stop the plasterboard...
Replies
0
Views
157
Hi There Just a quick one, I'm wondering what's everyone's thoughts on this are. A subby has clipped a cable to a plaster board ceiling using 3m...
Replies
8
Views
665
I have 16 ceiling spots to be replaced in a room being repurposed as a bathroom. Some will be over a shower, basin and bath hence need to be IP65...
Replies
19
Views
949
Hi. Looking for some guidance please as I’m wanting to replace a ceiling rose fitting into a ceiling pendant. Done this many times but never come...
Replies
10
Views
1K
Hi All I wanted to ask a question about the reference method. Passing wiring through holes made at 0.2-0.4 of the joist span. The cables passes...
Replies
1
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Electrical Forum

Welcome to the Electrical Forum at ElectriciansForums.net. The friendliest electrical forum online. General electrical questions and answers can be found in the electrical forum.
This website was designed, optimised and is hosted by Untold Media. Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock