Could anyone please settle an argument?

[Palmer Riley]

Oh Dear.

We're not a call centre, we are real people based in our ************ office who are full of knowledge about our products and would be delighted to help you.

Again, with the greatest respect you have not read all of the thread. I knew the answer to the original question, I wanted it to be confirmed independently. The mistake we made was that we sent out the wrong manufacturer of the correct part.

 

[A-hole customer]

Again, with the greatest respect you have not read all of the thread. I knew the answer to the original question, I wanted it to be confirmed independently. The mistake we made was that we sent out the wrong manufacturer of the correct part.

They do the same thing, but they are not the same part. The plug sockets are located in different places. Meaning if someone needs the crappy wrcdssk2 he will need to spend all day tracking one down, eventually finding one in scotland!!.

Can anyone answer why the bloody hell did they (can i mention the manufacturer on here, sure you know who) decide to be the only socket manufacturer to put the sockets slightly under the screws, when all the other specs are identical!? did they have a bad day last thing on friday and then think "oh....that'll do". And is the wrcdssk2 becoming obselete??

Anyway. I be glad to get this situation over with TBH.

Apologies to the OP for any grievances caused. Hope you recorded the phone call for training purposes

 

[Palmer Riley]

They do the same thing, but they are not the same part. The plug sockets are located in different places. Meaning if someone needs the crappy wrcdssk2 he will need to spend all day tracking one down, eventually finding one in scotland!!.

Can anyone answer why the bloody hell did they (can i mention the manufacturer on here, sure you know who) decide to be the only socket manufacturer to put the sockets slightly under the screws, when all the other specs are identical!? did they have a bad day last thing on friday and then think "oh....that'll do". And is the wrcdssk2 becoming obselete??

Anyway. I be glad to get this situation over with TBH.

Apologies to the OP for any grievances caused. Hope you recorded the phone call for training purposes

Would you be able to send me a photo of the enclosure that it needs to go into?

 

[A-hole customer]

Would you be able to send me a photo of the enclosure that it needs to go into?

Im sorry I cant ATM. left the phone out in the rain last week so using the old one. That was my only means of taking a photo. Same reason didnt send one of the back of the unit, which is slightly different but in appearance only it seems.

Basically if you look at the pics you posted at the start of this thread, you will see the sockets are slightly under the screws on the wrcdssk2. The housing I have corresponds to this layout. Which means any other socket with a normal layout wont allow the housing to close, rendering the whole thing useless.

I am starting to wish I just brought a whole new housing etc. would have saved me a lot of time and money. Oh well. c'est la vie.

 

[Marvo]

This is obviously where the problem is, the original socket and backbox were manufactured as a matched pair and not designed to accommodate other sockets of similar form factor. It's not unusual, manufacturers do it to encourage you to purchase their sockets in future because they know the back-box is often mounted in the wall and is difficult to replace.

 

[Palmer Riley]

Im sorry I cant ATM. left the phone out in the rain last week so using the old one. That was my only means of taking a photo. Same reason didnt send one of the back of the unit, which is slightly different but in appearance only it seems.

Basically if you look at the pics you posted at the start of this thread, you will see the sockets are slightly under the screws on the wrcdssk2. The housing I have corresponds to this layout. Which means any other socket with a normal layout wont allow the housing to close, rendering the whole thing useless.

I am starting to wish I just brought a whole new housing etc. would have saved me a lot of time and money. Oh well. c'est la vie.

Is it similar to this enclosure?

IP65 WEATHERPROOF GARDEN HEAVY DUTY 13A DOUBLE SWITCHED SOCKET WITH NEONS SS65-D

Have you now sourced the offending socket?

 

[davesparks]

Its changing an outdoor socket (inside polytunnel) from a (2.5mm arctic blue cable I believe) extension cable than runs from an internal plug with an extra RCD on it. Its all unplugged and its 2 screws and 3 wires. I ordered the exact same part I was replacing. Where's the problem??

When I say Im not an electrician, Im not one, its not my trade, but I know how to wire a plug

Don't forget the ferrules for the end of the flex.

And of course to carry out the correct tests after you have fitted the new socket, especially the correct RCD test. RCD's are notoriously unreliable, especially those cheap socket ones, and unless it is tested properly to prove that it trips in time to save someone life if the worst should happen you had better assume it won't work.

You are quite right it is only 3 wires, but it only takes one of them to kill a healthy adult!

 

[Knobhead]

Is he still getting free advertising?

 

[A-hole customer]

Don't forget the ferrules for the end of the flex.

And of course to carry out the correct tests after you have fitted the new socket, especially the correct RCD test. RCD's are notoriously unreliable, especially those cheap socket ones, and unless it is tested properly to prove that it trips in time to save someone life if the worst should happen you had better assume it won't work.

You are quite right it is only 3 wires, but it only takes one of them to kill a healthy adult!

I do have a healthy respect for electricity, as I do for people warning others of the dangers. Thanks.

I have already put ferrules on. Its been running for over a year. Im just replacing the socket like for like.

 

[A-hole customer]

Is it similar to this enclosure?

IP65 WEATHERPROOF GARDEN HEAVY DUTY 13A DOUBLE SWITCHED SOCKET WITH NEONS SS65-D

Have you now sourced the offending socket?

Pretty much the same as far as I can see. I expect the wire holes are in a slightly different place, but yeah. thats it.

As I mentioned, I managed to source the infamous wrcdssk2 from Scotland.

And that suspiciously looks like a link there. tut!