mgrandy38
DIY
- Reaction score
- 0
Long story short im on economy 7 tariff but have 2 types of heaters in my house 1 convector fused socket, 3 storage heaters not fused sockets. So ive changed to tubular heaters (reduced from 2.5kw down to 270w) but the only one that seems to be running is the convector fused socket. Dang! does it get hot for 270w. My question is do these need to be RCD fused sockets in order for them not to be open line and not working. Or you think i was sent a few duds. I assumed that these were powered constant like the convector style.
My CU has 2 fuse boards
The heaters are both on the immersion fuse to my knowledge.
Might save me ripping them off the wall to try on that one socket that works or should i bite the bullet. If you need more information just let me know im new to this forum.
My CU has 2 fuse boards
The heaters are both on the immersion fuse to my knowledge.
Might save me ripping them off the wall to try on that one socket that works or should i bite the bullet. If you need more information just let me know im new to this forum.