Fixing to a plasterboard wall?

[HappyHippyDad]

I have been asked to fit the following


A Glimpse Mirror and shaver socket.

Overall dimensions: 50cm H x 39cm D and weight is 6.2 kg's.

I think it should be ok on a plasterboard wall but just wanted some opinions (with regards the weight)? I wont be able to locate it on any joists because of where she wants it.

Cheers all...

 

[sparkdog]

I would think it would be OK with four fixings.You could always use the ones with wings that open up when you push them in.

 

[Geordie Spark]

I use these: Google Image Result for http://www.wickes.co.uk/content/ebiz/wickes/invt/156678/Cavity-Fixings_large.jpg

 

[Baker1988]

Use 4 spring toggles or even gravity bolts that will easily hold them up

 

[tbs1983]

I had this a couple of years ago with a large heavy mirror light, used them toggles with wings on as described above, a bit awkward to fit, be prepared for some effing and blinding. but did a good solid job once fitted!!!

 

[RmBo_0]

Yeah spring toggles are your best bet in my opinion.

 

[dan86]

same here.used them for various heavy things over the years and always a good solid fixing

 

[JulianC]

4 twirlies will do that no problem at all.

Rawlplug Metal Selfdrill Plasterboard Fixings Range | Power Tools Direct

 

[Rockingit]

Either metal screw fixings as per Julian (I prefer the Spitt ones) or spring toggles. Both have their downsides but both will do this job easily. Given that screw fixings are cheaper, I'd try those first - if you're not happy then at least you've got a hole left roughly big enough for the screw toggle to go through!

 

[Elmer BeFuddled]

4 twirlies will do that no problem at all.

Aah! But 4 twirlies will go nowhere before 9.30am.

 

[Guitarist]

Just remember, the weight is downwards and not under any kind of leverage. Rawl do a good range of fixings suitable for plasterboard, but just make sure you have a decent selection of quality screws (no.10 or 12 will be needed), although if using the metal ones Julian recommends you need to use the ones which come with them.
I have no issue with fixing heavy loads to plasterboard walls, even heavy heated towel rails. It just takes a while to get a feel for what works best with different board, so take some filler just in case (or practice on your own wall before you go)

 

[telectrix]

normally takes 3 working days for the customer's cheque to clear. you don't want it falling off before then. :shout:

 

[Fin170]

Find the stud and screw into that

Don't forget to run 3 core to it, customers love it when the shaver light comes on with the main light (and still runs the shaver point 24/7)

 

[Guitarist]

Find the stud and screw into that

Don't forget to run 3 core to it, customers love it when the shaver light comes on with the main light (and still runs the shaver point 24/7)

Would annoy the hell out of me

 

[HappyHippyDad]

Thanks all, thats reassured me

Just remember, the weight is downwards and not under any kind of leverage. Rawl do a good range of fixings suitable for plasterboard, but just make sure you have a decent selection of quality screws (no.10 or 12 will be needed), although if using the metal ones Julian recommends you need to use the ones which come with them.
I have no issue with fixing heavy loads to plasterboard walls, even heavy heated towel rails. It just takes a while to get a feel for what works best with different board, so take some filler just in case (or practice on your own wall before you go)

Thanks Guitarist,
The lady was kind enough to give me the mirror so I could have a bit of a play. I really like using the twirlies (spitt) so will probably use those, but its good to hear all the responses saying it will be fine. I thought it would be, but the backup is reassuring.